The acoustic design features a 200 mm (8 in) Kevlar cone woofer.
The pure butyl rubber surround and 50 mm (2 in) voice coil provide stability.
High frequencies are handled by a 25 mm (1 in) pure titanium compression driver with a patented diamond surround.
The frequency range extends from 37 Hz to 18 kHz (-10 dB), with a smooth response of 45 Hz–18 kHz (±3 dB).
The 2.5 kHz crossover incorporates a 3rd-order high-pass filter and a 2nd-order low-pass filter.
The combination of materials ensures excellent tonal accuracy and minimizes distortion.

The system handles 300 W Continuous Program and 150 W Continuous Pink Noise.
It delivers a maximum sound pressure level of 120 dB Short-Term and 114 dB Long-Term SPL at 1 meter.
It features a high-quality 110 W transformer for 70V and 100V lines with multiple taps.
At 70V, it offers 110W, 55W, 28W, and 14W taps, while at 100V it provides 110W, 55W, and 28W taps.
It also includes an 8-ohm Thru Position bypass setting with a minimum impedance of 6.3 ohms.
The rated sensitivity of 90 dB (2.83V/1m) ensures energy-efficient operation in any installation.

The specially designed horn provides wide coverage of 110°H x 85°V, with a rotatable design.
The rotatable horn allows the speaker to be positioned horizontally or vertically without loss of dispersion.
For long-term reliability, it features a SonicGuard overload protection circuit.
The system provides full-range power limiting to protect the crossover and drivers.
It also includes a replaceable internal fuse for protection against extreme overloads.
This enables uninterrupted, safe operation during demanding, extended programs.

The enclosure is made of high-impact polystyrene (HIPS).
The grille features a thermoset composite coating and protective WeatherMax multi-layer foam.
It is certified to IEC 529 IP-X4 for water resistance, making it suitable for safe outdoor installation.
It exceeds Mil Spec 810 military standards for humidity, salt spray, temperature, and ultraviolet (UV) radiation.
The input contacts feature a sealed MTC-PC2 cover and screw-down terminal strip.
The nickel-plated screws and copper base ensure excellent conductivity and prevent oxidation.

The patented InvisiBall mounting hardware wall-mount system is included in the package.
The InvisiBall mount allows easy and precise adjustment of the tilt angle in any direction.
It also features ten 6 mm suspension points for secure wire-rope suspension.
It supports optional accessories such as the U-bracket MTC-29UB and the MTC-29CM ceiling mount.
With external dimensions of 520 x 306 x 277 mm (30.6x27.7x52 cm) and a net weight of 12.2 kg, it is easy to install.
It is an excellent solution for restaurants, theme parks, hotels, and demanding professional venues.