Skroutz.mt

Rebel LED Strip 12V RGB Light 5m Type SMD5050 with Power Supply & Remote Control
LED Strips

Rebel LED Strip 12V RGB Light 5m Type SMD5050 with Power Supply & Remote Control Code: LED0175

Light color: RGB

Number and type of diodes: 300x5050 SMD

Protection class: IP20

Voltage: 12 V

Beam angle: 120 °

Luminous flux: 3600 lm

Nominal power: 28 W / 5 m (Power: maximum 14.4 W / m)

Operating...

Light color: RGB

Number and type of diodes: 300x5050 SMD

Protection class: IP20

Voltage: 12 V

Beam angle: 120 °

Luminous flux: 3600 lm

Nominal power: 28 W / 5 m (Power: maximum 14.4 W / m)

Operating temperature: -20 ° C - 50 ° C

Energy class: A

Dimensions: 5000 x 9.5 mm

Color controller:

Input voltage: 12 V DC

Output power: <72 W

Operating temperature: -20 ° C -...

72>
See full description See full description

Top specs

  • Power Supply

    The power supply concerns the voltage of the current that the LED strip must have.

    2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

    12V

    The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.

  • Protection certification

    "It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

    IP20

    LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.

  • Light Shade

    RGB

    The led film can take various shades by combining the colors, red, green and blue.
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

Light color: RGB

Number and type of diodes: 300x5050 SMD

Protection class: IP20

Voltage: 12 V

Beam angle: 120 °

Luminous flux: 3600 lm

Nominal power: 28 W / 5 m (Power: maximum 14.4 W / m)

Operating temperature: -20 ° C - 50 ° C

Energy class: A

Dimensions: 5000 x 9.5 mm

Color controller:

Input voltage: 12 V DC

Output power: <72 W

Operating temperature: -20 ° C - 60 ° C

Dimension: 105 x 75 x 29 mm

DC plug: 2.1 / 5.5

Power supply:

Input voltage: 100-240 V / 50-60 Hz

Output voltage: 12 V

Output current: 5000 mA

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
LED0175

Dimensions

Length
5 m
Power Source
12V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

12V

The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.
Light Colour
RGB

Light Colour

RGB
The led film can take various shades by combining the colors, red, green and blue.
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
Contents
Remote control, Power supply
USB
No

Additional Features

LED type
SMD5050

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD5050
The 5050 LED is brighter than the 3528 and suitable for large surfaces and spaces with ambient light. Additionally, they are better for applications with colors (RGB).
LED Density
60 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
14.4 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Light color: RGB

Number and type of diodes: 300x5050 SMD

Protection class: IP20

Voltage: 12 V

Beam angle: 120 °

Luminous flux: 3600 lm

Nominal power: 28 W / 5 m (Power: maximum 14.4 W / m)

Operating temperature: -20 ° C - 50 ° C

Energy class: A

Dimensions: 5000 x 9.5 mm

Color controller:

Input voltage: 12 V DC

Output power: <72 W

Operating temperature: -20 ° C - 60 ° C

Dimension: 105 x 75 x 29 mm

DC plug: 2.1 / 5.5

Power supply:

Input voltage: 100-240 V / 50-60 Hz

Output voltage: 12 V

Output current: 5000 mA

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
LED0175

Dimensions

Length
5 m
Power Source
12V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

12V

The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.
Light Colour
RGB

Light Colour

RGB
The led film can take various shades by combining the colors, red, green and blue.
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
Contents
Remote control, Power supply
USB
No

Additional Features

LED type
SMD5050

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD5050
The 5050 LED is brighter than the 3528 and suitable for large surfaces and spaces with ambient light. Additionally, they are better for applications with colors (RGB).
LED Density
60 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
14.4 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

41,91 €
14,00 €   shipping cost