Skroutz.mt

Kraft & Dele Welding Machine Inverter MAG / MIG with Maximum Welding Current 200A
Welding Machines

Kraft & Dele Welding Machine Inverter MAG / MIG with Maximum Welding Current 200A

Key features:

  • Welding current: 40-200A
  • Wire speed: 3-15 m / min
  • Welding methods: MIG / MAG
  • Welding technology: PWM
  • Dimensions: 310 x 155 x 220 mm
See full description

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    6.1

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

Capabilities

Inverter MIG welding machine from the manufacturer Kraft & Dele, where the inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MIG method requires the wire to have a special coating (flux) or it needs to be connected to an external gas cylinder (e.g., argon, CO2). The MAG method creates welds with gas supply, making it ideal for indoor welding. It features an output current of up to 200A, which melts thicker wires more easily and creates thick welds with fewer passes. Its weight reaches 6.5kg.

Features

  • Welding current: 40-200A
  • Wire speed: 3-15 m / min
  • Welding methods: MIG / MAG
  • Welding technology: PWM
  • Rated input capacity: 6.1KVA
  • Dimensions: 310 x 155 x 220 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MAG, MIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
-

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
6.1 kVA

Power: 6.1


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
6500 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • andreas_tsotsos
    5
    3 out of 3 members found this review helpful
    andreas_tsotsos

    I have had one for 4 years, it sticks perfectly and hears the current adjustment great because I stick continuously, I put a 5 kg spool on it and stitched the whole Mercedes. Note that it takes wire without gas, you only need fifty euros to get a 5 kg spool from Matrakis Athanasios in Evia and you have a tool

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    fjuerg

    Verified purchase

    Very good device, works excellently, unfortunately only operating instructions in Romansh

    Translated from Greek ·
    Did you find this review helpful?
  • andreas_tsotsos
    5
    andreas_tsotsos

    I have had one for 4 years, it sticks perfectly and hears the current adjustment great because I stick continuously, I put a 5 kg spool on it and stitched the whole Mercedes. Note that it takes wire without gas, you only need fifty euros to get a 5 kg spool from Matrakis Athanasios in Evia and you have a tool

    Translated from Greek ·
    3
  • 5
    fjuerg

    Very good device, works excellently, unfortunately only operating instructions in Romansh

    Translated from Greek ·
    0
  • See all

Description & Specifications

Capabilities

Inverter MIG welding machine from the manufacturer Kraft & Dele, where the inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MIG method requires the wire to have a special coating (flux) or it needs to be connected to an external gas cylinder (e.g., argon, CO2). The MAG method creates welds with gas supply, making it ideal for indoor welding. It features an output current of up to 200A, which melts thicker wires more easily and creates thick welds with fewer passes. Its weight reaches 6.5kg.

Features

  • Welding current: 40-200A
  • Wire speed: 3-15 m / min
  • Welding methods: MIG / MAG
  • Welding technology: PWM
  • Rated input capacity: 6.1KVA
  • Dimensions: 310 x 155 x 220 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MAG, MIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
-

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
6.1 kVA

Power: 6.1


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
6500 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • andreas_tsotsos
    5
    3 out of 3 members found this review helpful
    andreas_tsotsos

    I have had one for 4 years, it sticks perfectly and hears the current adjustment great because I stick continuously, I put a 5 kg spool on it and stitched the whole Mercedes. Note that it takes wire without gas, you only need fifty euros to get a 5 kg spool from Matrakis Athanasios in Evia and you have a tool

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    fjuerg

    Verified purchase

    Very good device, works excellently, unfortunately only operating instructions in Romansh

    Translated from Greek ·
    Did you find this review helpful?
  • andreas_tsotsos
    5
    andreas_tsotsos

    I have had one for 4 years, it sticks perfectly and hears the current adjustment great because I stick continuously, I put a 5 kg spool on it and stitched the whole Mercedes. Note that it takes wire without gas, you only need fifty euros to get a 5 kg spool from Matrakis Athanasios in Evia and you have a tool

    Translated from Greek ·
    3
  • 5
    fjuerg

    Very good device, works excellently, unfortunately only operating instructions in Romansh

    Translated from Greek ·
    0
  • See all