Skroutz.mt

Bass Polska BP-7902 Gasoline Surface Water Pump 4hp
Surface Water Pumps

Bass Polska BP-7902 Gasoline Surface Water Pump 4hp

The Bass Polska BP-7902 petrol-powered surface pump is used for pumping clean and dirty water, for example, to irrigate fields and meadows or to remove water from flooded areas. Its 4 hp, two-stroke,...

The Bass Polska BP-7902 petrol-powered surface pump is used for pumping clean and dirty water, for example, to irrigate fields and meadows or to remove water from flooded areas. Its 4 hp, two-stroke, air-cooled engine runs on a fuel-oil mixture at a ratio of 25:1. The flow rate reaches 10 m³/h, the delivery head is 20 m, and the pressure is 3.3 bar.

  • Power...
See full description See full description

Top specs

  • Power Supply

    Gasoline

    Ideal for areas without access to electricity 2. Unaffected by power outages or voltage fluctuations.

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Bass Polska BP-7902 petrol-powered surface pump is used for pumping clean and dirty water, for example, to irrigate fields and meadows or to remove water from flooded areas. Its 4 hp, two-stroke, air-cooled engine runs on a fuel-oil mixture at a ratio of 25:1. The flow rate reaches 10 m³/h, the delivery head is 20 m, and the pressure is 3.3 bar.

  • Power source: Petrol
  • Engine type: Two-stroke, air-cooled
  • Horsepower: 4 hp
  • Installation: Horizontal
  • Flow rate: 10 m³/h
  • Delivery head: 20 m
  • Pressure: 3.3 bar
  • Maximum suction depth: 7 m
  • Outlet diameter: 1″ / 25 mm
  • Shaft seal: Mechanical
  • Fuel-oil mixture ratio: 25:1
  • Fuel tank capacity: 1.1 L
  • Average fuel consumption: 0.4 L/h

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Power Source
Gasoline

Power Source

Gasoline
Ideal for areas without access to electricity 2. Unaffected by power outages or voltage fluctuations.
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Engine Type
Two-Stroke
Horsepower
4 hp
Flow Rate
10 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
20 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
3.3 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Bass Polska BP-7902 petrol-powered surface pump is used for pumping clean and dirty water, for example, to irrigate fields and meadows or to remove water from flooded areas. Its 4 hp, two-stroke, air-cooled engine runs on a fuel-oil mixture at a ratio of 25:1. The flow rate reaches 10 m³/h, the delivery head is 20 m, and the pressure is 3.3 bar.

  • Power source: Petrol
  • Engine type: Two-stroke, air-cooled
  • Horsepower: 4 hp
  • Installation: Horizontal
  • Flow rate: 10 m³/h
  • Delivery head: 20 m
  • Pressure: 3.3 bar
  • Maximum suction depth: 7 m
  • Outlet diameter: 1″ / 25 mm
  • Shaft seal: Mechanical
  • Fuel-oil mixture ratio: 25:1
  • Fuel tank capacity: 1.1 L
  • Average fuel consumption: 0.4 L/h

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Power Source
Gasoline

Power Source

Gasoline
Ideal for areas without access to electricity 2. Unaffected by power outages or voltage fluctuations.
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Set
No

Technical Specifications

Engine Type
Two-Stroke
Horsepower
4 hp
Flow Rate
10 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
20 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
3.3 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.