The "inverter" power control with electronic brain ensures the regulation of water temperature at a constant value from 30°C to 60°C, achieving better energy efficiency. It operates by automatically reducing its power (in kW), measuring the input-output temperature in relation to the water flow.

Ability to collaborate with solar water heaters, heat pumps or boiler systems, allowing the instant water heater to receive preheated water up to 60°C from other systems, according to the priority settings that have been defined.

4 different power levels in 1 machine, allowing the user to choose the desired power. Specifically, the device can be set to a higher power level 17,18,21 or 24 kW.

• With a flow switch that activates the device only with water flow.
• With a temperature control sensor for incoming water to the device.
• With a temperature control sensor for outgoing water from the device.
• With a safety thermostat for protection against overheating.

It is central and can be used either as the main water heating option for your home, or as a supplementary. It can provide hot water throughout the house for your everyday needs, as long as there are appropriate pipes for the distribution of hot water. This may potentially result in heat and energy losses due to distance.

The instant water heater is a type of heater that heats water in real time. It only heats the water that passes through it at that moment. There is no storage tank for hot water. This has many advantages, such as energy saving, as only the water that is used is heated, as well as a longer lifespan, as there is no water tank and accumulation of salts in the heating element and other components.

It operates on electric power and is three-phase, so a three-phase power supply is required.

The instant water heater has a cold water inlet pipe, which passes through the heating element, heats up, and comes out in the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is that the pressure of the cold water inlet is not too low.

The temperature of the water is regulated by a thermostat, so as not to exceed a maximum value. The temperatures that the hot water reaches are pre-set so that someone can use the hot water directly, without the need to mix it with cold water.

The maximum temperature that can be reached for hot water production is 60 °C, while the maximum flow rate of water reaches up to 7.2 liters per minute. As an indication, 38-42 °C degrees are the standard for shower use.

• An instant water heater is an ideal solution for hot water.
• With energy class A and "inverter" type for comfort and economy.
• Allows for immediate consumption of hot water without losses.
• Continuous operation of hot water without storage and restrictions.
• It is a safe device without pollution, fumes, and problems.
• Saves up to 60% compared to traditional water heaters.
• Saves up to 30% compared to mechanical water heaters.
• Consumes electricity only for the time the hot water is being pumped.
• There is no energy loss because they are placed near the faucets.
• Avoids wasting hot water storage in water heaters.
• Can be combined with solar systems (for greater savings).
• With silent operation, small size, and installation anywhere.
• Applicable to permanent, vacation homes, and commercial spaces.