Skroutz.mt

Termopasty Gel Clean Soldering Paste 1.4ml
Soldering Paste & Flux

Termopasty Gel Clean Soldering Paste 1.4ml

The Gel flux is a viscous RMA quality rosin intended for SMT assembly and repairs. The gel flux can be applied via a sieve, stencil, or syringe.

  • No wash required
  • Printing lifespan: 36 hours
  • Remains...

The Gel flux is a viscous RMA quality rosin intended for SMT assembly and repairs. The gel flux can be applied via a sieve, stencil, or syringe.

  • No wash required
  • Printing lifespan: 36 hours
  • Remains tacky for 72 hours
  • Good soldering capability on surfaces: Ag, Cu, Au, Zn, Cd, and SnPb

EAN: 5901764329435

Weight: 10.000 grams

See full description See full description
Product report

Description

Description

The Gel flux is a viscous RMA quality rosin intended for SMT assembly and repairs. The gel flux can be applied via a sieve, stencil, or syringe.

  • No wash required
  • Printing lifespan: 36 hours
  • Remains tacky for 72 hours
  • Good soldering capability on surfaces: Ag, Cu, Au, Zn, Cd, and SnPb

EAN: 5901764329435

Weight: 10.000 grams

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Paste

Quantity

Capacity
1.4 ml

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • fluxinhaler
    5
    fluxinhaler

    Flux in paste form. The manufacturer and Skroutz call it RMA (Rosin medium activated), but according to IPC J-STD-004 it is ROM0, Rosin - Organic - Medium activated - Halogen-free (0). In practice, this means it has more "bite" than quite a few fluxes, especially low-quality ones. According to the manufacturer, it is used for SMD soldering.

    The package DOES NOT include a nozzle. The paste is viscous, brown in color, and flows relatively easily from the syringe.
    It can work on surfaces made of: silver, zinc, cadmium, and tin-lead alloy (SnPb).

    During burning, the paste gives off smoke that resembles wax with alcohol, which in turn can get you high, so good ventilation is recommended during the session. In addition, it keeps SMDs in place, provided the airflow is not excessive. It does not require a large amount to work, since it spreads quickly and remains active for quite a long time.

    It is no clean, so there is no fear of short circuits or of it eating away the pads/traces of the board. It leaves brown sticky residue that comes off immediately with isopropyl alcohol if the user wants it to.

    Translated from Greek ·
    Did you find this review helpful?
  • fluxinhaler
    5
    fluxinhaler

    Flux in paste form. The manufacturer and Skroutz call it RMA (Rosin medium activated), but according to IPC J-STD-004 it is ROM0, Rosin - Organic - Medium activated - Halogen-free (0). In practice, this means it has more "bite" than quite a few fluxes, especially low-quality ones. According to the manufacturer, it is used for SMD soldering.

    The package DOES NOT include a nozzle. The paste is viscous, brown in color, and flows relatively easily from the syringe.
    It can work on surfaces made of: silver, zinc, cadmium, and tin-lead alloy (SnPb).

    During burning, the paste gives off smoke that resembles wax with alcohol, which in turn can get you high, so good ventilation is recommended during the session. In addition, it keeps SMDs in place, provided the airflow is not excessive. It does not require a large amount to work, since it spreads quickly and remains active for quite a long time.

    It is no clean, so there is no fear of short circuits or of it eating away the pads/traces of the board. It leaves brown sticky residue that comes off immediately with isopropyl alcohol if the user wants it to.

    Translated from Greek ·
    0
  • See all

Description & Specifications

The Gel flux is a viscous RMA quality rosin intended for SMT assembly and repairs. The gel flux can be applied via a sieve, stencil, or syringe.

  • No wash required
  • Printing lifespan: 36 hours
  • Remains tacky for 72 hours
  • Good soldering capability on surfaces: Ag, Cu, Au, Zn, Cd, and SnPb

EAN: 5901764329435

Weight: 10.000 grams

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Paste

Quantity

Capacity
1.4 ml

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • fluxinhaler
    5
    fluxinhaler

    Flux in paste form. The manufacturer and Skroutz call it RMA (Rosin medium activated), but according to IPC J-STD-004 it is ROM0, Rosin - Organic - Medium activated - Halogen-free (0). In practice, this means it has more "bite" than quite a few fluxes, especially low-quality ones. According to the manufacturer, it is used for SMD soldering.

    The package DOES NOT include a nozzle. The paste is viscous, brown in color, and flows relatively easily from the syringe.
    It can work on surfaces made of: silver, zinc, cadmium, and tin-lead alloy (SnPb).

    During burning, the paste gives off smoke that resembles wax with alcohol, which in turn can get you high, so good ventilation is recommended during the session. In addition, it keeps SMDs in place, provided the airflow is not excessive. It does not require a large amount to work, since it spreads quickly and remains active for quite a long time.

    It is no clean, so there is no fear of short circuits or of it eating away the pads/traces of the board. It leaves brown sticky residue that comes off immediately with isopropyl alcohol if the user wants it to.

    Translated from Greek ·
    Did you find this review helpful?
  • fluxinhaler
    5
    fluxinhaler

    Flux in paste form. The manufacturer and Skroutz call it RMA (Rosin medium activated), but according to IPC J-STD-004 it is ROM0, Rosin - Organic - Medium activated - Halogen-free (0). In practice, this means it has more "bite" than quite a few fluxes, especially low-quality ones. According to the manufacturer, it is used for SMD soldering.

    The package DOES NOT include a nozzle. The paste is viscous, brown in color, and flows relatively easily from the syringe.
    It can work on surfaces made of: silver, zinc, cadmium, and tin-lead alloy (SnPb).

    During burning, the paste gives off smoke that resembles wax with alcohol, which in turn can get you high, so good ventilation is recommended during the session. In addition, it keeps SMDs in place, provided the airflow is not excessive. It does not require a large amount to work, since it spreads quickly and remains active for quite a long time.

    It is no clean, so there is no fear of short circuits or of it eating away the pads/traces of the board. It leaves brown sticky residue that comes off immediately with isopropyl alcohol if the user wants it to.

    Translated from Greek ·
    0
  • See all
3,40 €
14,00 €   shipping cost