HDD Hard Drives

Western Digital Red Plus 3TB HDD Hard Drive 3.5" SATA III 5400rpm with 128MB Cache for NAS WD30EFZX

Key features:

  • Capacity: 2000GB
  • Form Factor: 3.5"
  • Communication Protocol: SATA III
  • Rotation Speed: 7200rpm
See full description

Top specs

  • See all
The product is not available for shipping to the selected country.

Description

Description

Speed

The Western Digital Red Plus is a 3.5" HDD hard drive with a capacity of 2TB and a rotational speed of 5400 RPM. This speed is recommended for all uses such as file storage, software installation, and gaming.

SATA III Protocol

Operates with the SATA III communication protocol and is recommended for home use. It is the most modern SATA standard and the motherboard must support it for the drive to function at its maximum potential. It can also be connected to SATA II ports without any problem, but it will work at lower speeds.

Installation

For installation in a desktop computer, you will need a SATA III data cable and an available SATA port on the motherboard. You will also need an available SATA power cable from the power supply.

    Manufacturer

    See full description

    Specifications

    Specifications

    Compatibility

    Use
    NAS

    Product Details

    Capacity
    3000 GB
    Communication Protocol
    SATA III
    Recording Technology
    CMR

    Performance

    RPM
    5400 rpm
    Cache size
    128 MB

    Dimensions

    Form Factor
    3.5 "

    Important information

    Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

    See all specifications

    Reviews (100)

    Reviews

    1. 85
    2. 11
    3. 2
    4. 1
    5. 1
    Review this product
    • Reliability
    • Temperature
    • Quiet
    • Value for money
    • Speed

    Slim Tech
    5
    40 out of 41 members found this review helpful

    Verified purchase

    A disk for NAS at a reasonable price.
    It is quiet, you can only hear the disks spinning after waking up from standby for 2-3 seconds. Out of the 10 I bought, one arrived dead, but WD replaced it with a new one within 3 days through RMA.

    In terms of speed, it's fine for a 5400 RPM with only 128MB. In RAID 5 with 10Gb/s LAN Aggregation, it consistently writes/reads at around 146 MB/s. With SSD cache, it can reach up to 180 MB/s. The temperature ranges from 25 to 35 degrees Celsius, but I haven't tested it without air conditioning during the summer yet.

    The only negative thing I noticed is that it takes about four hours to synchronize and build the RAID in NTFS and EXT4. For BTRFS, it took over 8 hours. I don't understand if this happens only during the initial RAID build or if every time a disk needs to be replaced it will take 8+ hours. Because if it really takes 8+ hours, then every replacement will be a heart-stopping moment, fearing that another disk might fail or that the data in the RAID will become unreadable. Despite being CMR.

    Now, if someone wants to use BTRFS for RAID, they should be aware, but I guess it could also be an issue with my setup.

    Edit: Now that it's summer and I've seen the temperatures, they reach around 48 degrees Celsius without air conditioning in the NAS with the same 10 disks and only the two 90mm fans running.

    Edit2: The problem with the slow RAID in BTRFS turned out to be an issue with the NAS, which was resolved after a newer update was released.

    In terms of durability, they haven't had any issues for a year now. They don't have problems with bit-rot or producing errors. They work properly in BTRFS with Clone, Snapshots, and Cold Backup.

    Translated from Greek ·
    • Reliability
    • Quiet
    • Temperature
    • Value for money
    • Speed
    Did you find this review helpful?

    Eftixis_Sartzetakis
    2
    6 out of 6 members found this review helpful

    Verified purchase

    I don't know what's happening, although I've had them for years without problems, in the last month 3 have been destroyed. They start making noise and then they don't read the files. Of course, they were under warranty and they replaced them for me

    Translated from Greek ·
    • Reliability
    • Quiet
    • Value for money
    • Speed
    • Temperature
    Did you find this review helpful?
    • Classically, a reliable RED drive from WD. Of course, a victim of the constantly rising prices of similar products. I got it to replace a similar older generation one in my NAS and it worked just fine.

      Translated from Greek ·
      0
    • I had bought two 8TB ones in 2024. They were installed in a Synology 423+ SHR, of course with BTRFS. SILENT, which is logical, and until recently they seemed to be workhorses.
      BUT in recent scheduled data scrubbing sessions, they started showing checksum mismatches in various files..
      RAM was ruled out as dozens of memtests were run on 4 different modules. The extended SMART tests did not show any problems, which is concerning for the transparency of the drives' condition.

      Translated from Greek ·
      3
    • I bought it at 220 for the 8TB mainly for media storage. It's not the fastest out there but for the use I wanted it for, it's just right

      Translated from Greek ·
      3
    • Very good drive. I installed it in my server and have had it running for a year now. No failures or issues. It is very solid and fast enough for media streaming from a home server.

      Translated from Greek ·
      4
    • I have placed these drives inside my NAS and let me tell you, even if I didnt need them for a NAS I would still buy them, because they have incredible value and resilience, and with these prices are even cheaper than commercial drives

      Translated from Greek ·
      3
    • See all

    Description & Specifications

    Speed

    The Western Digital Red Plus is a 3.5" HDD hard drive with a capacity of 2TB and a rotational speed of 5400 RPM. This speed is recommended for all uses such as file storage, software installation, and gaming.

    SATA III Protocol

    Operates with the SATA III communication protocol and is recommended for home use. It is the most modern SATA standard and the motherboard must support it for the drive to function at its maximum potential. It can also be connected to SATA II ports without any problem, but it will work at lower speeds.

    Installation

    For installation in a desktop computer, you will need a SATA III data cable and an available SATA port on the motherboard. You will also need an available SATA power cable from the power supply.

      Manufacturer

      Compatibility

      Use
      NAS

      Product Details

      Capacity
      3000 GB
      Communication Protocol
      SATA III
      Recording Technology
      CMR

      Performance

      RPM
      5400 rpm
      Cache size
      128 MB

      Dimensions

      Form Factor
      3.5 "

      Important information

      Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

      Reviews (100)

      1. 85
      2. 11
      3. 2
      4. 1
      5. 1
      Review this product
      • Reliability
      • Temperature
      • Quiet
      • Value for money
      • Speed

      Slim Tech
      5
      40 out of 41 members found this review helpful

      Verified purchase

      A disk for NAS at a reasonable price.
      It is quiet, you can only hear the disks spinning after waking up from standby for 2-3 seconds. Out of the 10 I bought, one arrived dead, but WD replaced it with a new one within 3 days through RMA.

      In terms of speed, it's fine for a 5400 RPM with only 128MB. In RAID 5 with 10Gb/s LAN Aggregation, it consistently writes/reads at around 146 MB/s. With SSD cache, it can reach up to 180 MB/s. The temperature ranges from 25 to 35 degrees Celsius, but I haven't tested it without air conditioning during the summer yet.

      The only negative thing I noticed is that it takes about four hours to synchronize and build the RAID in NTFS and EXT4. For BTRFS, it took over 8 hours. I don't understand if this happens only during the initial RAID build or if every time a disk needs to be replaced it will take 8+ hours. Because if it really takes 8+ hours, then every replacement will be a heart-stopping moment, fearing that another disk might fail or that the data in the RAID will become unreadable. Despite being CMR.

      Now, if someone wants to use BTRFS for RAID, they should be aware, but I guess it could also be an issue with my setup.

      Edit: Now that it's summer and I've seen the temperatures, they reach around 48 degrees Celsius without air conditioning in the NAS with the same 10 disks and only the two 90mm fans running.

      Edit2: The problem with the slow RAID in BTRFS turned out to be an issue with the NAS, which was resolved after a newer update was released.

      In terms of durability, they haven't had any issues for a year now. They don't have problems with bit-rot or producing errors. They work properly in BTRFS with Clone, Snapshots, and Cold Backup.

      Translated from Greek ·
      • Reliability
      • Quiet
      • Temperature
      • Value for money
      • Speed
      Did you find this review helpful?

      Eftixis_Sartzetakis
      2
      6 out of 6 members found this review helpful

      Verified purchase

      I don't know what's happening, although I've had them for years without problems, in the last month 3 have been destroyed. They start making noise and then they don't read the files. Of course, they were under warranty and they replaced them for me

      Translated from Greek ·
      • Reliability
      • Quiet
      • Value for money
      • Speed
      • Temperature
      Did you find this review helpful?
      • Classically, a reliable RED drive from WD. Of course, a victim of the constantly rising prices of similar products. I got it to replace a similar older generation one in my NAS and it worked just fine.

        Translated from Greek ·
        0
      • I had bought two 8TB ones in 2024. They were installed in a Synology 423+ SHR, of course with BTRFS. SILENT, which is logical, and until recently they seemed to be workhorses.
        BUT in recent scheduled data scrubbing sessions, they started showing checksum mismatches in various files..
        RAM was ruled out as dozens of memtests were run on 4 different modules. The extended SMART tests did not show any problems, which is concerning for the transparency of the drives' condition.

        Translated from Greek ·
        3
      • I bought it at 220 for the 8TB mainly for media storage. It's not the fastest out there but for the use I wanted it for, it's just right

        Translated from Greek ·
        3
      • Very good drive. I installed it in my server and have had it running for a year now. No failures or issues. It is very solid and fast enough for media streaming from a home server.

        Translated from Greek ·
        4
      • I have placed these drives inside my NAS and let me tell you, even if I didnt need them for a NAS I would still buy them, because they have incredible value and resilience, and with these prices are even cheaper than commercial drives

        Translated from Greek ·
        3
      • See all