Cover Latex plastic paint by Chromodomi is intended for indoor use and offers high coverage and whiteness. It is washable and certified according to the EN 71-3 standard.
Apply in two coats, allowing 1–2 hours between coats, after stirring thoroughly. It reaches full mechanical resistance in 20–30 days. For proper adhesion, the surface must be free of dust, grease, oil, peeling old paint, rust, mold and moisture. On new or porous surfaces, apply a suitable primer first.
Do not apply at temperatures below 6 °C or above 40 °C, or when relative humidity exceeds 80%. Apply with a brush, roller or spray gun. Clean tools immediately with warm water and soap. Do not dispose of wash water in groundwater. Wear gloves and protective clothing, and use eye and face protection during application.
- Use: Indoor
- Colour: White
- Quantity: 750 ml
- Coverage: High
- Whiteness: High
- Washable: Yes
- Certification: EN 71-3
- Coats: 2
- Time between coats: 1–2 hours
- Time to develop mechanical resistance: 20–30 days
- Application temperature range: 6–40 °C
- Maximum relative humidity for application: 80%
- Application tools: Brush, roller, spray gun
- Tool cleaning: With warm water and soap
- Protective equipment: Gloves, protective clothing, eye and face protection
- Usage
- Interior
- Quantity
- 0.75 lt
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.