Skroutz.mt

Gardena 17000 Aquasensor Single-phase Pump Well 1hp 09036-20
Submersible Water Pumps

Gardena 17000 Aquasensor Single-phase Pump Well 1hp 09036-20

Key features:

  • Maximum head height: 9m
  • Maximum suction height: 7m
  • Maximum water temperature: 35°C
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    9

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Features

  • Type: Gravity pump
  • Correct usage: Drainage
  • Suitable for outdoor use: YES
  • Suitable for indoor use: YES
  • Product color: Black, Silver
  • Assembly required: NO

Technical details

  • Maximum operating pressure: 0.9 bar
  • Maximum manometric height: 9m
  • Flow rate: 17000 l/h
  • Maximum suction height: 7m
  • Maximum water temperature: 35°C
  • Delivery head: 9m

Energy management

  • Power: 750W
  • Power source type: AC
  • Power cord type: H07 RNF

Weight and dimensions

  • Width: 257mm
  • Depth: 183mm
  • Height: 334mm

Ergonomics

  • Transport wheels: NO
  • Carrying handle(s): YES

Connectivity

  • Cable length: 10m
  • Type of connection thread: G1 1/2

Data packages

  • Quantity per package: 1 piece

At a glance

  • The clean water drainage pump has a power of 750 W and pumps up to 17,000 liters of clean or slightly dirty water per hour at a pressure of 0.9 bar and a maximum immersion depth of up to 9 m. 
  • Allows automatic start and stop operation with water level adjustment (e.g., activation from just 5 mm) 
  • Operates without direct contact with water and features an easy-to-read LED display
  • Includes timer function and intuitive touch control
  • Protects the pump from running dry 
  • Made of durable stainless steel for high protection and aesthetics 
  • Motor shaft with ceramic coating and triple sealing (including oil chamber) for increased durability

Flexible pipe connection system

  • Features a flow boost switch for use when flat suction is not required
  • Supports connection of pipes with diameters: 32 mm (1¼”), 38 mm (1½”), 50 mm (2”)
  • G1½ thread for further expansion possibilities

    • Specifications

    • Maximum operating pressure: 0.9 bar
    • Maximum manometric height: 9m
    • Flow rate: 17000 l/h
    • Maximum suction height: 7m
    • Maximum water temperature: 35°C
    • Power: 750W
    • Power source type: AC
    • Power cable type: H07 RNF
    • Cable length: 10m

    Manufacturer

    Manufacturer Details

    Warnings & Safety Information
    See full description

    Specifications

    Specifications

    Dimensions

    Type
    Well

    Type

    Well
    They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
    Power Source
    Electric

    Power Source

    Electric
    The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
    Voltage
    Single-Phase

    Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
    Horsepower
    1 hp

    Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
    Power
    750 W

    Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

    Features

    Electronic Level Sensor
    Yes

    Electronic Level Sensor

    It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
    with Cutter Impeller
    No

    with Cutter Impeller

    Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
    Float switch
    Yes

    Float switch

    It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
    Outlet Nozzle
    1/2"

    Outlet Nozzle

    The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
    Vortex
    No

    Vortex

    The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

    Pumping Specifications

    Maximum Head Height
    9 m

    Maximum Head Height: 9


    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
    Maximum Output
    17 m³/h

    Maximum Output

    The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
    Pump Submersion Depth
    7 m
    Maximum Particle Size
    5 mm

    Maximum Particle Size

    Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
    Shallow Suction
    Yes

    Shallow Suction

    This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

    Materials & Construction

    Set
    No
    Stainless
    Yes
    Protection Certification
    IPX8

    Important information

    Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

    See all specifications

    Description & Specifications

    Features

    • Type: Gravity pump
    • Correct usage: Drainage
    • Suitable for outdoor use: YES
    • Suitable for indoor use: YES
    • Product color: Black, Silver
    • Assembly required: NO

    Technical details

    • Maximum operating pressure: 0.9 bar
    • Maximum manometric height: 9m
    • Flow rate: 17000 l/h
    • Maximum suction height: 7m
    • Maximum water temperature: 35°C
    • Delivery head: 9m

    Energy management

    • Power: 750W
    • Power source type: AC
    • Power cord type: H07 RNF

    Weight and dimensions

    • Width: 257mm
    • Depth: 183mm
    • Height: 334mm

    Ergonomics

    • Transport wheels: NO
    • Carrying handle(s): YES

    Connectivity

    • Cable length: 10m
    • Type of connection thread: G1 1/2

    Data packages

    • Quantity per package: 1 piece

    At a glance

    • The clean water drainage pump has a power of 750 W and pumps up to 17,000 liters of clean or slightly dirty water per hour at a pressure of 0.9 bar and a maximum immersion depth of up to 9 m. 
    • Allows automatic start and stop operation with water level adjustment (e.g., activation from just 5 mm) 
    • Operates without direct contact with water and features an easy-to-read LED display
    • Includes timer function and intuitive touch control
    • Protects the pump from running dry 
    • Made of durable stainless steel for high protection and aesthetics 
    • Motor shaft with ceramic coating and triple sealing (including oil chamber) for increased durability

    Flexible pipe connection system

    • Features a flow boost switch for use when flat suction is not required
    • Supports connection of pipes with diameters: 32 mm (1¼”), 38 mm (1½”), 50 mm (2”)
    • G1½ thread for further expansion possibilities

    • Specifications

    • Maximum operating pressure: 0.9 bar
    • Maximum manometric height: 9m
    • Flow rate: 17000 l/h
    • Maximum suction height: 7m
    • Maximum water temperature: 35°C
    • Power: 750W
    • Power source type: AC
    • Power cable type: H07 RNF
    • Cable length: 10m

    Manufacturer

    Manufacturer Details

    Warnings & Safety Information

    Dimensions

    Type
    Well

    Type

    Well
    They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
    Power Source
    Electric

    Power Source

    Electric
    The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
    Voltage
    Single-Phase

    Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
    Horsepower
    1 hp

    Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
    Power
    750 W

    Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

    Features

    Electronic Level Sensor
    Yes

    Electronic Level Sensor

    It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
    with Cutter Impeller
    No

    with Cutter Impeller

    Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
    Float switch
    Yes

    Float switch

    It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
    Outlet Nozzle
    1/2"

    Outlet Nozzle

    The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
    Vortex
    No

    Vortex

    The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

    Pumping Specifications

    Maximum Head Height
    9 m

    Maximum Head Height: 9


    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
    Maximum Output
    17 m³/h

    Maximum Output

    The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
    Pump Submersion Depth
    7 m
    Maximum Particle Size
    5 mm

    Maximum Particle Size

    Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
    Shallow Suction
    Yes

    Shallow Suction

    This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

    Materials & Construction

    Set
    No
    Stainless
    Yes
    Protection Certification
    IPX8

    Important information

    Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.