Skroutz.mt

Gardena 20000 Aquasensor Single-phase Pump Waste Water / Sewage 750W 9044-20 970486101
Submersible Water Pumps

Gardena 20000 Aquasensor Single-phase Pump Waste Water / Sewage 750W 9044-20 970486101

Key features:

  • Maximum pump submersion: 7m
  • Cable length: 10m
  • Power: 750W
  • Output: 2000 lit/h
  • Maximum head height: 9m
  • Maximum pressure: 0.9 bar
See full description

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    9

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all

User Manual

The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The modern 20000 Aquasensor pump helps you pump and clean your garden pond, drain a reservoir with dirty water, or empty and dry your wet cellar after a flood. Suitable for performing excellent work in many different areas. It offers high performance with low consumption, which means it is energy-saving but extremely powerful. With a pressure of 0.9 bar and a delivery head of 9m, it can pump 20000 liters of dirty water per hour and is particularly efficient. The dirt particles contained in the water can be handled with a size of up to 35 mm.

High performance with low energy consumption

The Drainage Pump 20000 Aquasensor for Dirty Water is powerful and extremely efficient thanks to the 750 W motor with a maximum pumping capacity of 20000 liters per hour.

Innovative Aquasensor LED System

Thanks to the revolutionary new Aquasensor system, the pump operates even in tight spaces and offers adjustable activation and deactivation heights with precision as well as many other innovative and protective technologies.

Powerful and Versatile

With a maximum submersion depth of 9 m at a pressure of 0.9 bar, the pump is particularly powerful and suitable for various applications, such as flooded construction pits or contaminated ponds. It is ideal for handling impurities with particle sizes up to 35 mm.

First-class construction, extremely reliable and user-friendly

An intelligent design, high-quality construction with stainless steel elements and ceramic coating, the practical handle, and other features such as the digital touch level sensor allow very comfortable use and easy maintenance of the drainage pump.

Easy GARDENA Hose Connection System

The Drainage Pump 20000 Aquasensor for Dirty Water allows the connection of flexible hoses with a diameter of 32 mm (1 ¼ "), 38 mm (1 ½") or 50 mm (2 ") and the connection with a G1 ½ thread for further options.

Specifications

  • Maximum pump submersion: 7m
  • Cable length: 10m
  • Power: 750W
  • Output: 2000 lit/h
  • Maximum head height: 9m
  • Maximum pressure: 0.9 bar
  • Maximum liquid temperature: 35 °C
  • Power cable type: H07 RNF
  • Electrical protection category: IP X8

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
Yes

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/2", 1 1/4", 2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9 m

Maximum Head Height: 9


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
20 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The modern 20000 Aquasensor pump helps you pump and clean your garden pond, drain a reservoir with dirty water, or empty and dry your wet cellar after a flood. Suitable for performing excellent work in many different areas. It offers high performance with low consumption, which means it is energy-saving but extremely powerful. With a pressure of 0.9 bar and a delivery head of 9m, it can pump 20000 liters of dirty water per hour and is particularly efficient. The dirt particles contained in the water can be handled with a size of up to 35 mm.

High performance with low energy consumption

The Drainage Pump 20000 Aquasensor for Dirty Water is powerful and extremely efficient thanks to the 750 W motor with a maximum pumping capacity of 20000 liters per hour.

Innovative Aquasensor LED System

Thanks to the revolutionary new Aquasensor system, the pump operates even in tight spaces and offers adjustable activation and deactivation heights with precision as well as many other innovative and protective technologies.

Powerful and Versatile

With a maximum submersion depth of 9 m at a pressure of 0.9 bar, the pump is particularly powerful and suitable for various applications, such as flooded construction pits or contaminated ponds. It is ideal for handling impurities with particle sizes up to 35 mm.

First-class construction, extremely reliable and user-friendly

An intelligent design, high-quality construction with stainless steel elements and ceramic coating, the practical handle, and other features such as the digital touch level sensor allow very comfortable use and easy maintenance of the drainage pump.

Easy GARDENA Hose Connection System

The Drainage Pump 20000 Aquasensor for Dirty Water allows the connection of flexible hoses with a diameter of 32 mm (1 ¼ "), 38 mm (1 ½") or 50 mm (2 ") and the connection with a G1 ½ thread for further options.

Specifications

  • Maximum pump submersion: 7m
  • Cable length: 10m
  • Power: 750W
  • Output: 2000 lit/h
  • Maximum head height: 9m
  • Maximum pressure: 0.9 bar
  • Maximum liquid temperature: 35 °C
  • Power cable type: H07 RNF
  • Electrical protection category: IP X8

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
Yes

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/2", 1 1/4", 2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9 m

Maximum Head Height: 9


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
20 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.