Skroutz.mt

Prodipe ST1 MK2 Lanen Condenser Microphone XLR Shock Mounted for Vocal
Microphones

Prodipe ST1 MK2 Lanen Condenser Microphone XLR Shock Mounted for Vocal

The ST-1 MK2 Lanen, designed based on the STC-3D MK2, is one of the few conversion microphones available on the market, equipped with a true 34mm diaphragm capsule, with a gold-covered one-inch...

The ST-1 MK2 Lanen, designed based on the STC-3D MK2, is one of the few conversion microphones available on the market, equipped with a true 34mm diaphragm capsule, with a gold-covered one-inch diaphragm, in this price range.

See full description See full description

  • Type (Directivity)

    Unidirectional (Cardioid)

    Cardioid: Captures sound primarily from the front, reducing sounds from the sides and rear. Ideal for vocals, podcasting, and live recordings.
  • Usage Vocal, Musical Instruments, Studio
  • Placement Shock Mounted
  • Connectivity XLR
  • See all
129,00 €
103 00 €
-20%
price drop
Delivery Wed, 05 Aug - Fri, 07 Aug
14,00 €   shipping cost
Sent from Greece
From Athens Pro Audio 5.0 (3)
5.0 (3 reviews)
Greece
See Audio on the page of Athens Pro Audio
Review the product
Product report

Description

Description

The ST-1 MK2 Lanen, designed based on the STC-3D MK2, is one of the few conversion microphones available on the market, equipped with a true 34mm diaphragm capsule, with a gold-covered one-inch diaphragm, in this price range.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Mode of Operation
Condenser (Large Diaphragm)

Mode of Operation

Condenser (Large Diaphragm)
Warm and full sound with emphasis on vocals. Mainly used in studios for vocals and solo instruments.
Directivity
Unidirectional (Cardioid)

Directivity

Unidirectional (Cardioid)

Cardioid: Captures sound primarily from the front, reducing sounds from the sides and rear. Ideal for vocals, podcasting, and live recordings.
Frequency
20 - 20000 Hz

Frequency

Indicates the frequency range that a microphone can capture and is expressed in Hertz (Hz). The more balanced the range, the more natural and clear the sound.

Usage examples:

  • 100 – 10,000 Hz to 200 – 12,000 Hz: Emphasis on speech intelligibility, with limited low and very high frequencies.
  • 50 – 14,000 Hz to 80 – 16,000 Hz: Balance of volume and clarity. Ideal for live performances and dynamic microphones.
  • 40 – 15,000 Hz to 50 – 18,000 Hz: Rich, natural vocal sound. Suitable for podcasts, radio, and streaming.
  • 20 – 18,000 Hz to 20 – 20,000 Hz: Full spectrum with high detail and "air". Ideal for studio recording.
  • Below 20 Hz & above 20,000 Hz: Extended technical range for specialized studio applications.
Impendance
100 ohm

Impendance

Indicates how "easily" the microphone transmits its signal to the equipment (mixer, sound card, amplifier). It is expressed in Ohms (Ω).

  • Low impedance (≤ 600 Ω): Stable signal, less noise, ideal for professional equipment and long cable runs.
  • Medium impedance (600 – 1,000 Ω): Good balance, common in live and general use.
  • High impedance (> 1,000 Ω): More sensitive to loss and noise, usually found in older or specialized equipment.
Max SPL
130 dB

Max SPL

Max SPL (Maximum Sound Pressure Level) is the maximum sound pressure level (in dB) that a microphone can withstand before it starts to distort the sound.

  • High Max SPL (e.g., 140-160dB): Ideal for recording loud sources such as drums, amplified guitar, or live concerts.
  • Lower Max SPL (e.g., 120dB): Suitable for vocals and softer recordings.

The higher the Max SPL, the louder the sounds it can capture without distortion.
Connectivity
XLR

General Characteristics

Device Group
Vocal, Musical Instruments, Studio
Placement
Shock Mounted
Vintage
No
Set
No
Color
Black

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The ST-1 MK2 Lanen, designed based on the STC-3D MK2, is one of the few conversion microphones available on the market, equipped with a true 34mm diaphragm capsule, with a gold-covered one-inch diaphragm, in this price range.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Mode of Operation
Condenser (Large Diaphragm)

Mode of Operation

Condenser (Large Diaphragm)
Warm and full sound with emphasis on vocals. Mainly used in studios for vocals and solo instruments.
Directivity
Unidirectional (Cardioid)

Directivity

Unidirectional (Cardioid)

Cardioid: Captures sound primarily from the front, reducing sounds from the sides and rear. Ideal for vocals, podcasting, and live recordings.
Frequency
20 - 20000 Hz

Frequency

Indicates the frequency range that a microphone can capture and is expressed in Hertz (Hz). The more balanced the range, the more natural and clear the sound.

Usage examples:

  • 100 – 10,000 Hz to 200 – 12,000 Hz: Emphasis on speech intelligibility, with limited low and very high frequencies.
  • 50 – 14,000 Hz to 80 – 16,000 Hz: Balance of volume and clarity. Ideal for live performances and dynamic microphones.
  • 40 – 15,000 Hz to 50 – 18,000 Hz: Rich, natural vocal sound. Suitable for podcasts, radio, and streaming.
  • 20 – 18,000 Hz to 20 – 20,000 Hz: Full spectrum with high detail and "air". Ideal for studio recording.
  • Below 20 Hz & above 20,000 Hz: Extended technical range for specialized studio applications.
Impendance
100 ohm

Impendance

Indicates how "easily" the microphone transmits its signal to the equipment (mixer, sound card, amplifier). It is expressed in Ohms (Ω).

  • Low impedance (≤ 600 Ω): Stable signal, less noise, ideal for professional equipment and long cable runs.
  • Medium impedance (600 – 1,000 Ω): Good balance, common in live and general use.
  • High impedance (> 1,000 Ω): More sensitive to loss and noise, usually found in older or specialized equipment.
Max SPL
130 dB

Max SPL

Max SPL (Maximum Sound Pressure Level) is the maximum sound pressure level (in dB) that a microphone can withstand before it starts to distort the sound.

  • High Max SPL (e.g., 140-160dB): Ideal for recording loud sources such as drums, amplified guitar, or live concerts.
  • Lower Max SPL (e.g., 120dB): Suitable for vocals and softer recordings.

The higher the Max SPL, the louder the sounds it can capture without distortion.
Connectivity
XLR

General Characteristics

Device Group
Vocal, Musical Instruments, Studio
Placement
Shock Mounted
Vintage
No
Set
No
Color
Black

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

103,00 €
14,00 €   shipping cost