Isomat Rapicret cement mortar is used for the rapid repair of concrete elements, fixing, anchoring, sealing holes and forming coves. It is applied to floors, walls and ceilings where high strength and fast work are required.
It is classified as a PCC R3 concrete repair mortar in accordance with EN 1504-3. It offers very good adhesion to the substrate and reduced water permeability.
- Type: Fast-setting cement repair mortar
- Application: On floors, walls and ceilings
- Working time: Approximately 15 minutes at +20 °C
- Consumption: Approximately 17.5 kg/m² per cm of layer thickness
- Layer thickness: Up to 3 cm
- Compressive strength: Over 8 N/mm² at 24 hours, over 15 N/mm² at 7 days and over 28 N/mm² at 28 days
- Flexural strength: Over 5 N/mm²
- Modulus of elasticity: At least 15 GPa
- Adhesion: At least 1.60 N/mm²
- Reaction to fire: Euroclass A1
- Colour: Grey
- Grain size: Up to 1.3 mm
- Water requirement: 4.60 l per 25 kg bag
- Mixing ratio: 3.6 parts RAPICRET to 1 part water by volume
- Mixing time: Up to 1 minute
- Application temperature: From +5 °C to +30 °C
- Dry mortar density: 1.50 ± 0.10 kg/l
- Wet mortar density: 1.95 ± 0.10 kg/l
- Chloride content: 0.00%
- Weight: 25 kg
- Type
- Cement mortar
- Weight
- 25 kg
- Pressed Cement Mortar
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.