Isomat AK-Block adhesive is cement-based and enhanced with polymer components (resins). It is used for laying aerated concrete building blocks and offers a long open time, high initial and final bond strength, and moisture resistance.
It is CE marked in accordance with EN 998-2 as a thin-layer masonry mortar for exterior use and structures subject to structural requirements. Before application, aerated concrete blocks must be free of dust. Add the adhesive to 6.75 l of water per 25 kg bag while mixing until a homogeneous, paste-like mixture forms. Leave the mixture to mature for approximately 5 minutes, then mix again. Apply with a notched trowel, then position and press the aerated concrete blocks into place. The product contains cement and reacts alkalinely with water.
- Type: Cement-based mortar
- Reinforcement: Polymer components (resins)
- Colour: White
- Quantity: 25 kg
- Compressive strength: Class M5
- Initial shear bond strength: 0.3 N/mm²
- Reaction to fire: Class A1
- Application thickness: Up to 10 mm
- Application temperature: From +5 to +35 °C
- Temperature resistance: From -30 to +90 °C
- Water requirement: 6.75 l per 25 kg bag
- Pot life: At least 4.5 h
- Adjustment time: More than 7 min
- Particle size: Up to 0.5 mm
- Density of dry hardened mortar: 1450 kg/m³
- Thermal conductivity (λ10,dry): 0.45 W/mK
- Consumption: Approximately 13 kg per m³ of aerated concrete masonry
- Certification: CE marking in accordance with EN 998-2
- Type
- Decorative Bricks & Stones
- Quantity
- 25 kg
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.