Isomat Screed-100 ready-mixed cement mortar is used to fill and level floors that will be covered with tiles, marble or bonded flooring, as well as to create slopes on rooftops and in outdoor areas. It replaces unreinforced concrete or lightweight concrete and is suitable for indoor and outdoor use. It is lightweight, has adequate strength and good workability, and leaves a smooth surface.
The substrate must be sound and free of loose material, dust, grease and other foreign substances, and must be thoroughly dampened before application. For a thickness of 2–4 cm, a bonding layer made with ADIPLAST mixed with cement, sand and water is recommended. To prepare the mortar, add 3.75 l of water to each bag and mix until homogeneous. Apply in the same way as concrete.
- Type: Ready-mixed floor-levelling cement mortar
- Package weight: 25 kg
- Application areas: Indoor and outdoor areas
- Application thickness: 2–10 cm per layer
- Classification: CT-C7-F3-AR12 according to EN 13813
- Reaction to fire: A1fl
- Colour: Grey
- Water requirement: 3.75 l per 25 kg bag
- Bulk density of dry mortar: 1.74 ± 0.10 kg/l
- Bulk density of wet mortar: 1.60 ± 0.20 kg/l
- Compressive strength: 9.90 ± 1.00 N/mm²
- Flexural strength: 3.60 ± 0.30 N/mm²
- Abrasion resistance: 9.24 cm³/50 cm²
- Pot life: 4 h at +20°C
- Consumption: Approximately 14 kg/m² per cm of layer thickness
- Application temperature: At least +5°C
- Type
- Cement mortar
- Weight
- 25 kg
- Pressed Cement Mortar
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.