Skroutz.mt

vidaXL Pool Pump Filter Single-Phase with Horsepower 1.10hp and Maximum Water Flow 9000 liters/hour
Pool Water Pumps

vidaXL Pool Pump Filter Single-Phase with Horsepower 1.10hp and Maximum Water Flow 9000 liters/hour

Key features:

  • Maximum Flow: 9000 liters/hour
  • Power: 1.1hp
  • Cable Length (with plug): 1m
  • Drainage Filter
  • Dimensions: 55 x 25 x 23.5cm
See full description
  • Item Filter

  • Power

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
  • Pool Size Standard Domestic (50 to 90 m³)

  • Power Supply

    Single-Phase

    Operates with standard household electricity (230V). It is suitable for residential pools.

  • Flow rate (max)

    Shows how many liters of water the pump can deliver in 1 hour.

  • Manometric Head (Max)

    Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

  • Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.
  • See all
255 17 €
Delivery Fri, 07 Aug - Thu, 13 Aug
23,00 €   shipping cost
Sent from Greece
From myhomiq
Greece
20+ pieces
See Swimming Pool Equipment on the page of myhomiq
Review the product
Product report

Description

Description

The pump is a suitable choice for pools, garden ponds, and spas. It is part of the water circulation system to keep it clean. The transparent lid of the drainage filter allows you to check if it is full, while the basket is removable from the pump for cleaning of debris and waste materials. Thanks to its powerful motor, this pump is particularly durable and operates with minimal noise. With reinforced thermoplastic casing, it ensures good performance in all weather conditions and has a long lifespan.

Benefits

  • Maximum Flow: 9000 liters / hour
  • Power: 1.1hp
  • Cable Length (with plug): 1m
  • Drainage filter
  • Dimensions: 55 x 25 x 23.5cm
  • Power: 800 W, 230 V, 50 Hz
  • Max. flow:  liters / hour
  • H-max: 13.5 m
  • Input/output diameter: 57 mm (G 2;25'')
  • Protection type: IPX4

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Type
Filter
Power (hp)
1.1 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
800 W
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Standard Domestic (50 to 90 m³)
Filter Included
No

Performance

Maximum Supply
9000 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
13.5 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Cable Length
1 m
Connection Nozzle
57 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The pump is a suitable choice for pools, garden ponds, and spas. It is part of the water circulation system to keep it clean. The transparent lid of the drainage filter allows you to check if it is full, while the basket is removable from the pump for cleaning of debris and waste materials. Thanks to its powerful motor, this pump is particularly durable and operates with minimal noise. With reinforced thermoplastic casing, it ensures good performance in all weather conditions and has a long lifespan.

Benefits

  • Maximum Flow: 9000 liters / hour
  • Power: 1.1hp
  • Cable Length (with plug): 1m
  • Drainage filter
  • Dimensions: 55 x 25 x 23.5cm
  • Power: 800 W, 230 V, 50 Hz
  • Max. flow:  liters / hour
  • H-max: 13.5 m
  • Input/output diameter: 57 mm (G 2;25'')
  • Protection type: IPX4

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Type
Filter
Power (hp)
1.1 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
800 W
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Standard Domestic (50 to 90 m³)
Filter Included
No

Performance

Maximum Supply
9000 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
13.5 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Cable Length
1 m
Connection Nozzle
57 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

255,17 €
23,00 €   shipping cost