Skroutz.mt

GloboStar LED Strip 12V Green Light 5m Type SMD2835
LED Strips

GloboStar LED Strip 12V Green Light 5m Type SMD2835 Code: 70005

The GloboStar 70005 LED strip emits green light and has a density of 60 LEDs per metre. It can be cut every 50 mm, or every 3 LEDs, and the cut sections can be reconnected by soldering or using...

The GloboStar 70005 LED strip emits green light and has a density of 60 LEDs per metre. It can be cut every 50 mm, or every 3 LEDs, and the cut sections can be reconnected by soldering or using special connectors. The 3M adhesive tape on the back makes it easy to install on a clean, completely dry surface.

When powered from one end, the strip length must not...

See full description See full description

Top specs

See all

  • Power Supply

    The power supply concerns the voltage of the current that the LED strip must have.

    2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

    12V

    The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.

  • Protection certification

    "It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

    IP20

    LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
  • Light Shade Green

Learn more about invoicing
Review the product
Product report

Description & Specifications

The GloboStar 70005 LED strip emits green light and has a density of 60 LEDs per metre. It can be cut every 50 mm, or every 3 LEDs, and the cut sections can be reconnected by soldering or using special connectors. The 3M adhesive tape on the back makes it easy to install on a clean, completely dry surface.

When powered from one end, the strip length must not exceed 5 m. Calculate the power supply rating based on the strip’s power consumption per metre and its total length.

  • Power supply: 12 V DC
  • LED type: SMD2835
  • LED density: 60 LEDs/m
  • Power consumption: 4.8 W/m
  • Light colour: Green
  • Length: 5 m
  • Beam angle: 120°
  • Luminous flux: 412 lm/m
  • Brightness adjustment: From 0 to 100% with a 12 V dimmer
  • Starting time: 0.2 sec
  • Service life: Over 50,000 hours
  • Protection rating: IP20
  • Energy class: A
  • Certifications: CE and RoHS
  • Width: 8 mm
  • Height: 2 mm
  • Installation: 3M adhesive tape
  • Cutting interval: Every 50 mm (3 LEDs)

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
70005

Dimensions

Length
5 m
Power Source
12V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

12V

The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.
Light Colour
Green
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
USB
No

Additional Features

LED type
SMD2835

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD2835
It is a 2.8mm wide and 3.5mm long led type. They are suitable for indoor lighting. The 2835s are brighter than the 3528s and can provide much more light.
LED Density
60 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
4.8 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

5,39 €
14,00 €   shipping cost