Skroutz.mt

Triton Instaflow T30ir Wall Mounted Electric Single-Phase Instant Heater Tap for Bathroom 3kW
Instant Water Heaters & Instant Heater Taps

Triton Instaflow T30ir Wall Mounted Electric Single-Phase Instant Heater Tap for Bathroom 3kW

Key features:

  • Electric Single-Phase
  • Maximum Power: 3 kW
  • Maximum Flow Rate: 1.7 lt/min
  • Dimensions: 18 x 23 x 8 cm

The electronic instant water heater Triton offers maximum comfort and economy for any sink.

See full description

User Manual

169 50 €
Delivery by Mon, 10 Aug
14,00 €   shipping cost
Sent from Greece
From Bestprice4u
Greece
1 piece
See Water Heaters on the page of Bestprice4u
Review the product
Product report

Description

Description

Installation

It is suitable for individual use (application only in one supply) in the bathroom, it can be installed easily and quickly. It offers convenience in use or maintenance and meets your daily needs for hot water.

Temperature Control

The temperature adjustment of the water output is proportional and depends on the water flow rate, according to the selected power.

  • Easy installation without any modifications.
  • Connection to the sink faucet for water intake.
  • The power supply cable can be connected from the panel or another reinforced supply.

Features:

  • Numbered temperature scale with regulator.
  • 20 cm rotating spout.
  • Spray nozzle
  • Pressure switch for protection against water interruption
  • Safety valve for protection against excessive pressure
  • Thermostat with thermal safety (2 in 1) at 60 ºC and 100 ºC.

What is an instant water heater?

The instant water heater is a type of water heater that heats water in real-time. It only heats the water that passes through it at that moment. There is no hot water storage tank. This has many advantages, such as energy savings, since only the water that is used is heated, and longer lifespan, as there is no water tank and no accumulation of salts on the heating element and other components.

It operates with electricity and is single-phase.

How It Works

The instant water heater has an inlet pipe for cold water, which passes through the resistance, heats up, and exits through the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is that the pressure of the incoming cold water is not too low.

The water temperature is regulated by a thermostat, so it does not exceed a maximum value. The temperatures that the hot water reaches are pre-set so that one can use the hot water directly, without needing to mix it with cold water.

The maximum temperature it can reach for hot water production is 60 °C, while the maximum water flow rate reaches up to 1.7 liters per minute. Indicatively, 38-42 °C degrees are standard for shower use.

Advantages of an instant water heater compared to a classic electric water heater

  • It is small in size and doesn't take up much space.
  • There are no energy losses, as only the water being used is heated at that moment. Therefore, we save on the electricity bill. In a traditional water heater, the hot water that is not used is wasted.
  • The hot water used in the instant water heater is used as is, without mixing with cold, as happens in a traditional water heater. Thus, we save water as well as electricity.
  • There is no need to wait for the water to heat up. As soon as we turn on the tap, hot water runs in a few seconds. A traditional water heater takes a few minutes, depending on its size.
  • The hot water never runs out. As long as we have the tap open, we will have hot water.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Product Details

Power Source
Electric Single Phase
Maximum Power
3 kW

Maximum Power

The higher the power of the water heater, the faster the water can be heated and therefore the greater the flow of water at the selected temperature.

2. Those with a power of up to 5-6kw are usually used in a sink, while those intended for use in the shower usually have a power greater than 10kw.
Maximum Flow Rate
1.7 lt/min
Maximum Temperature
60 °C

Maximum Temperature

As an indication, 38-42 °C degrees are usually used for a hot shower.
Temperature Setting
Heating Levels
Placement
Bathroom
Wall Mounted
Yes
Inverter
No
Remote Control
No

Dimensions

Height
18 cm
Width
23 cm
Length
8 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Installation

It is suitable for individual use (application only in one supply) in the bathroom, it can be installed easily and quickly. It offers convenience in use or maintenance and meets your daily needs for hot water.

Temperature Control

The temperature adjustment of the water output is proportional and depends on the water flow rate, according to the selected power.

  • Easy installation without any modifications.
  • Connection to the sink faucet for water intake.
  • The power supply cable can be connected from the panel or another reinforced supply.

Features:

  • Numbered temperature scale with regulator.
  • 20 cm rotating spout.
  • Spray nozzle
  • Pressure switch for protection against water interruption
  • Safety valve for protection against excessive pressure
  • Thermostat with thermal safety (2 in 1) at 60 ºC and 100 ºC.

What is an instant water heater?

The instant water heater is a type of water heater that heats water in real-time. It only heats the water that passes through it at that moment. There is no hot water storage tank. This has many advantages, such as energy savings, since only the water that is used is heated, and longer lifespan, as there is no water tank and no accumulation of salts on the heating element and other components.

It operates with electricity and is single-phase.

How It Works

The instant water heater has an inlet pipe for cold water, which passes through the resistance, heats up, and exits through the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is that the pressure of the incoming cold water is not too low.

The water temperature is regulated by a thermostat, so it does not exceed a maximum value. The temperatures that the hot water reaches are pre-set so that one can use the hot water directly, without needing to mix it with cold water.

The maximum temperature it can reach for hot water production is 60 °C, while the maximum water flow rate reaches up to 1.7 liters per minute. Indicatively, 38-42 °C degrees are standard for shower use.

Advantages of an instant water heater compared to a classic electric water heater

  • It is small in size and doesn't take up much space.
  • There are no energy losses, as only the water being used is heated at that moment. Therefore, we save on the electricity bill. In a traditional water heater, the hot water that is not used is wasted.
  • The hot water used in the instant water heater is used as is, without mixing with cold, as happens in a traditional water heater. Thus, we save water as well as electricity.
  • There is no need to wait for the water to heat up. As soon as we turn on the tap, hot water runs in a few seconds. A traditional water heater takes a few minutes, depending on its size.
  • The hot water never runs out. As long as we have the tap open, we will have hot water.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Product Details

Power Source
Electric Single Phase
Maximum Power
3 kW

Maximum Power

The higher the power of the water heater, the faster the water can be heated and therefore the greater the flow of water at the selected temperature.

2. Those with a power of up to 5-6kw are usually used in a sink, while those intended for use in the shower usually have a power greater than 10kw.
Maximum Flow Rate
1.7 lt/min
Maximum Temperature
60 °C

Maximum Temperature

As an indication, 38-42 °C degrees are usually used for a hot shower.
Temperature Setting
Heating Levels
Placement
Bathroom
Wall Mounted
Yes
Inverter
No
Remote Control
No

Dimensions

Height
18 cm
Width
23 cm
Length
8 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

169,50 €
14,00 €   shipping cost