Skroutz.mt

Einhell Benchtop Drill Press TC-BD 500 with Power 500Watt
Metal Processing Machinery

Einhell Benchtop Drill Press TC-BD 500 with Power 500Watt

The Einhell TC-BD 500 column drill allows for precise drilling of holes in workpieces made of wood or metal. With an output power of 500 W and 9 speed settings suitable for all materials, it forms the...

The Einhell TC-BD 500 column drill allows for precise drilling of holes in workpieces made of wood or metal. With an output power of 500 W and 9 speed settings suitable for all materials, it forms the basis for precision drilling tasks. For quick and accurate results, there is a depth guide. The maximum drilling depth is 50 mm. 

It features a sturdy...

See full description See full description
  • Item Benchtop Drill Press
  • Power 0.5 kW
  • See all
158 70 €
Delivery by Fri, 03 Jul
47,00 €   shipping cost
Sent from Greece
From Tripanaki 4.7 (65)
4.7 (65 reviews)
Greece
4 pieces
See Tools on the page of Tripanaki
Product report

Description

Description

The Einhell TC-BD 500 column drill allows for precise drilling of holes in workpieces made of wood or metal. With an output power of 500 W and 9 speed settings suitable for all materials, it forms the basis for precision drilling tasks. For quick and accurate results, there is a depth guide. The maximum drilling depth is 50 mm. 

It features a sturdy geared chuck that can accommodate the most common drill sizes. The ball-bearing drilling spindle results in long-lasting and easy use. For versatility, this column drill comes with an incredibly adjustable drilling table height. 

It is also possible to rotate and tilt the drilling table. A welcome feature for applying pressure is the three-arm rubber handle. 

For safety during use, there is a retractable chip guard and the On/Off switch with zero-voltage release function prevents the machine from restarting unintentionally after a power outage.

Features

  • Power supply: 230-240 V | 50 Hz
  • Power: 350 W
  • Maximum motor power (S6 | S6%): 500 W | 40 %
  • Spindle speed: 300 min^-1 - 2410 min^-1
  • Number of speed levels: 9 settings
  • Tiltable workbench: 45 ° - 45 °
  • Chuck holder: B16
  • Drilling diameter: 1.5 mm - 13 mm
  • Throat: 115 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Type
Benchtop Drill Press
Power
0.5 kW

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

3.0
1
3.0
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • George_Tsitsis
    3
    1 out of 1 members found this review helpful
    George_Tsitsis

    Verified purchase

    Overall, I found it very functional and it makes things easier for you. Good as a Drill for a small workshop.
    On the negative side: It arrived without the two Allen tightening screws that secure the column. I contacted the store and our communication was immediate, and they suggested replacing them. Of course, I went to a nearby store in my area and bought two screws based on the specifications they gave me... For two small screws, it wasn't a problem, and I thank them for their prompt response.
    Another negative I found is that the cover for the speeds does not fit flush with the machine. The case for the tightening key of the chuck broke immediately because it is too narrow for the millimeters..!
    Functionally, however, I will say everything is okay.
    I don't think, though, that it is a machine worth the price that the company Einhell is asking.
    So, 3 stars.

    Translated from Greek ·
    Did you find this review helpful?
  • George_Tsitsis
    3
    George_Tsitsis

    Overall, I found it very functional and it makes things easier for you. Good as a Drill for a small workshop.
    On the negative side: It arrived without the two Allen tightening screws that secure the column. I contacted the store and our communication was immediate, and they suggested replacing them. Of course, I went to a nearby store in my area and bought two screws based on the specifications they gave me... For two small screws, it wasn't a problem, and I thank them for their prompt response.
    Another negative I found is that the cover for the speeds does not fit flush with the machine. The case for the tightening key of the chuck broke immediately because it is too narrow for the millimeters..!
    Functionally, however, I will say everything is okay.
    I don't think, though, that it is a machine worth the price that the company Einhell is asking.
    So, 3 stars.

    Translated from Greek ·
    1
  • See all

Description & Specifications

The Einhell TC-BD 500 column drill allows for precise drilling of holes in workpieces made of wood or metal. With an output power of 500 W and 9 speed settings suitable for all materials, it forms the basis for precision drilling tasks. For quick and accurate results, there is a depth guide. The maximum drilling depth is 50 mm. 

It features a sturdy geared chuck that can accommodate the most common drill sizes. The ball-bearing drilling spindle results in long-lasting and easy use. For versatility, this column drill comes with an incredibly adjustable drilling table height. 

It is also possible to rotate and tilt the drilling table. A welcome feature for applying pressure is the three-arm rubber handle. 

For safety during use, there is a retractable chip guard and the On/Off switch with zero-voltage release function prevents the machine from restarting unintentionally after a power outage.

Features

  • Power supply: 230-240 V | 50 Hz
  • Power: 350 W
  • Maximum motor power (S6 | S6%): 500 W | 40 %
  • Spindle speed: 300 min^-1 - 2410 min^-1
  • Number of speed levels: 9 settings
  • Tiltable workbench: 45 ° - 45 °
  • Chuck holder: B16
  • Drilling diameter: 1.5 mm - 13 mm
  • Throat: 115 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
Type
Benchtop Drill Press
Power
0.5 kW

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

3.0
1
3.0
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • George_Tsitsis
    3
    1 out of 1 members found this review helpful
    George_Tsitsis

    Verified purchase

    Overall, I found it very functional and it makes things easier for you. Good as a Drill for a small workshop.
    On the negative side: It arrived without the two Allen tightening screws that secure the column. I contacted the store and our communication was immediate, and they suggested replacing them. Of course, I went to a nearby store in my area and bought two screws based on the specifications they gave me... For two small screws, it wasn't a problem, and I thank them for their prompt response.
    Another negative I found is that the cover for the speeds does not fit flush with the machine. The case for the tightening key of the chuck broke immediately because it is too narrow for the millimeters..!
    Functionally, however, I will say everything is okay.
    I don't think, though, that it is a machine worth the price that the company Einhell is asking.
    So, 3 stars.

    Translated from Greek ·
    Did you find this review helpful?
  • George_Tsitsis
    3
    George_Tsitsis

    Overall, I found it very functional and it makes things easier for you. Good as a Drill for a small workshop.
    On the negative side: It arrived without the two Allen tightening screws that secure the column. I contacted the store and our communication was immediate, and they suggested replacing them. Of course, I went to a nearby store in my area and bought two screws based on the specifications they gave me... For two small screws, it wasn't a problem, and I thank them for their prompt response.
    Another negative I found is that the cover for the speeds does not fit flush with the machine. The case for the tightening key of the chuck broke immediately because it is too narrow for the millimeters..!
    Functionally, however, I will say everything is okay.
    I don't think, though, that it is a machine worth the price that the company Einhell is asking.
    So, 3 stars.

    Translated from Greek ·
    1
  • See all
158,70 €
47,00 €   shipping cost