Skroutz.mt

Einhell TC-BD 500 Pillar Drill With Power 0.5kW
Metalworking Drills

Einhell TC-BD 500 Pillar Drill With Power 0.5kW

The Einhell TC-BD 500 column drill allows for precise drilling of holes in workpieces made of wood or metal. With an output power of 500 W and 9 speed settings suitable for all materials, it forms the...

The Einhell TC-BD 500 column drill allows for precise drilling of holes in workpieces made of wood or metal. With an output power of 500 W and 9 speed settings suitable for all materials, it forms the basis for precision drilling tasks. For quick and accurate results, there is a depth guide. The maximum drilling depth is 50 mm. 

It features a sturdy...

See full description See full description
158 70 €
Delivery by Fri, 18 Sep
47,00 €   shipping cost
Sent from Greece
From Tripanaki 4.8 (65)
4.8 (65 reviews)
Greece
3 pieces
See Tools on the page of Tripanaki

Learn more about invoicing
Product report

Description

Description

The Einhell TC-BD 500 column drill allows for precise drilling of holes in workpieces made of wood or metal. With an output power of 500 W and 9 speed settings suitable for all materials, it forms the basis for precision drilling tasks. For quick and accurate results, there is a depth guide. The maximum drilling depth is 50 mm. 

It features a sturdy geared chuck that can accommodate the most common drill sizes. The ball-bearing drilling spindle results in long-lasting and easy use. For versatility, this column drill comes with an incredibly adjustable drilling table height. 

It is also possible to rotate and tilt the drilling table. A welcome feature for applying pressure is the three-arm rubber handle. 

For safety during use, there is a retractable chip guard and the On/Off switch with zero-voltage release function prevents the machine from restarting unintentionally after a power outage.

Features

  • Power supply: 230-240 V | 50 Hz
  • Power: 350 W
  • Maximum motor power (S6 | S6%): 500 W | 40 %
  • Spindle speed: 300 min^-1 - 2410 min^-1
  • Number of speed levels: 9 settings
  • Tiltable workbench: 45 ° - 45 °
  • Chuck holder: B16
  • Drilling diameter: 1.5 mm - 13 mm
  • Throat: 115 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Pillar Drill

Type

Pillar Drill
Fixed bench or floor drill press for vertical, precise holes in metals with comfort and safety.
Power
0.5 kW

Power

Specifies the power of the machine. More kW means easier handling of thicker or harder/more durable materials and greater durability in demanding tasks, such as in the press brake or metal furnace.
Maximum Drilling Diameter
-

Maximum Drilling Diameter

Indicates the largest hole diameter that the drill can make in metal. A larger value allows for more demanding, heavy-duty tasks.
Rotations
2410 rpm

Rotations

Shows how fast the drill rotates. The correct speed ensures a clean cut and protection.
Tool Holder / Spindle Taper
B16

Tool Holder / Spindle Taper

Specifies the type of the drill's tool holder for securing the cutting tools. Choosing the correct type ensures compatibility with your drill bits.
Gears
-

Gears

Refers to the number of mechanical speeds. More speeds (gearbox) offer flexibility, adjusting the power to the specific metal.
Weight
15 kg

Column Drill

Spindle Travel
-

Spindle Travel

Defines the maximum vertical movement of the chuck. A greater stroke allows you to drill deeper holes with a single movement of the lever.
Column Diameter
-

Column Diameter

Specifies the thickness of the central column. A larger diameter reduces vibrations, providing maximum stability and drilling accuracy.

Magnetic Drill

Magnet Holding Force
-

Magnet Holding Force

Determines how strongly the drill is held to the metal. A higher value ensures absolute stability and safety in demanding tasks.
Threading
-

Threading

Indicates whether the drill has clockwise and counterclockwise operation, so it can cut threads in metal, saving you time.

Milling Drill

Maximum Milling Diameter
-

Maximum Milling Diameter

Shows the largest milling cutter size that the machine can accept. The larger it is, the wider the cuts you can make.

Table Dimensions

Length
-
Width
-

Width

Shows the width of the drill or the table. Useful for knowing whether it fits on your workbench.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

3.0
1
3.0
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • George_Tsitsis
    3
    1 out of 1 members found this review helpful
    George_Tsitsis

    Verified purchase

    Overall, I found it very functional and it makes things easier for you. Good as a Drill for a small workshop.
    On the negative side: It arrived without the two Allen tightening screws that secure the column. I contacted the store and our communication was immediate, and they suggested replacing them. Of course, I went to a nearby store in my area and bought two screws based on the specifications they gave me... For two small screws, it wasn't a problem, and I thank them for their prompt response.
    Another negative I found is that the cover for the speeds does not fit flush with the machine. The case for the tightening key of the chuck broke immediately because it is too narrow for the millimeters..!
    Functionally, however, I will say everything is okay.
    I don't think, though, that it is a machine worth the price that the company Einhell is asking.
    So, 3 stars.

    Translated from Greek ·
    Did you find this review helpful?
  • George_Tsitsis
    3
    George_Tsitsis

    Overall, I found it very functional and it makes things easier for you. Good as a Drill for a small workshop.
    On the negative side: It arrived without the two Allen tightening screws that secure the column. I contacted the store and our communication was immediate, and they suggested replacing them. Of course, I went to a nearby store in my area and bought two screws based on the specifications they gave me... For two small screws, it wasn't a problem, and I thank them for their prompt response.
    Another negative I found is that the cover for the speeds does not fit flush with the machine. The case for the tightening key of the chuck broke immediately because it is too narrow for the millimeters..!
    Functionally, however, I will say everything is okay.
    I don't think, though, that it is a machine worth the price that the company Einhell is asking.
    So, 3 stars.

    Translated from Greek ·
    1
  • See all

Description & Specifications

The Einhell TC-BD 500 column drill allows for precise drilling of holes in workpieces made of wood or metal. With an output power of 500 W and 9 speed settings suitable for all materials, it forms the basis for precision drilling tasks. For quick and accurate results, there is a depth guide. The maximum drilling depth is 50 mm. 

It features a sturdy geared chuck that can accommodate the most common drill sizes. The ball-bearing drilling spindle results in long-lasting and easy use. For versatility, this column drill comes with an incredibly adjustable drilling table height. 

It is also possible to rotate and tilt the drilling table. A welcome feature for applying pressure is the three-arm rubber handle. 

For safety during use, there is a retractable chip guard and the On/Off switch with zero-voltage release function prevents the machine from restarting unintentionally after a power outage.

Features

  • Power supply: 230-240 V | 50 Hz
  • Power: 350 W
  • Maximum motor power (S6 | S6%): 500 W | 40 %
  • Spindle speed: 300 min^-1 - 2410 min^-1
  • Number of speed levels: 9 settings
  • Tiltable workbench: 45 ° - 45 °
  • Chuck holder: B16
  • Drilling diameter: 1.5 mm - 13 mm
  • Throat: 115 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Pillar Drill

Type

Pillar Drill
Fixed bench or floor drill press for vertical, precise holes in metals with comfort and safety.
Power
0.5 kW

Power

Specifies the power of the machine. More kW means easier handling of thicker or harder/more durable materials and greater durability in demanding tasks, such as in the press brake or metal furnace.
Maximum Drilling Diameter
-

Maximum Drilling Diameter

Indicates the largest hole diameter that the drill can make in metal. A larger value allows for more demanding, heavy-duty tasks.
Rotations
2410 rpm

Rotations

Shows how fast the drill rotates. The correct speed ensures a clean cut and protection.
Tool Holder / Spindle Taper
B16

Tool Holder / Spindle Taper

Specifies the type of the drill's tool holder for securing the cutting tools. Choosing the correct type ensures compatibility with your drill bits.
Gears
-

Gears

Refers to the number of mechanical speeds. More speeds (gearbox) offer flexibility, adjusting the power to the specific metal.
Weight
15 kg

Column Drill

Spindle Travel
-

Spindle Travel

Defines the maximum vertical movement of the chuck. A greater stroke allows you to drill deeper holes with a single movement of the lever.
Column Diameter
-

Column Diameter

Specifies the thickness of the central column. A larger diameter reduces vibrations, providing maximum stability and drilling accuracy.

Magnetic Drill

Magnet Holding Force
-

Magnet Holding Force

Determines how strongly the drill is held to the metal. A higher value ensures absolute stability and safety in demanding tasks.
Threading
-

Threading

Indicates whether the drill has clockwise and counterclockwise operation, so it can cut threads in metal, saving you time.

Milling Drill

Maximum Milling Diameter
-

Maximum Milling Diameter

Shows the largest milling cutter size that the machine can accept. The larger it is, the wider the cuts you can make.

Table Dimensions

Length
-
Width
-

Width

Shows the width of the drill or the table. Useful for knowing whether it fits on your workbench.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

3.0
1
3.0
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • George_Tsitsis
    3
    1 out of 1 members found this review helpful
    George_Tsitsis

    Verified purchase

    Overall, I found it very functional and it makes things easier for you. Good as a Drill for a small workshop.
    On the negative side: It arrived without the two Allen tightening screws that secure the column. I contacted the store and our communication was immediate, and they suggested replacing them. Of course, I went to a nearby store in my area and bought two screws based on the specifications they gave me... For two small screws, it wasn't a problem, and I thank them for their prompt response.
    Another negative I found is that the cover for the speeds does not fit flush with the machine. The case for the tightening key of the chuck broke immediately because it is too narrow for the millimeters..!
    Functionally, however, I will say everything is okay.
    I don't think, though, that it is a machine worth the price that the company Einhell is asking.
    So, 3 stars.

    Translated from Greek ·
    Did you find this review helpful?
  • George_Tsitsis
    3
    George_Tsitsis

    Overall, I found it very functional and it makes things easier for you. Good as a Drill for a small workshop.
    On the negative side: It arrived without the two Allen tightening screws that secure the column. I contacted the store and our communication was immediate, and they suggested replacing them. Of course, I went to a nearby store in my area and bought two screws based on the specifications they gave me... For two small screws, it wasn't a problem, and I thank them for their prompt response.
    Another negative I found is that the cover for the speeds does not fit flush with the machine. The case for the tightening key of the chuck broke immediately because it is too narrow for the millimeters..!
    Functionally, however, I will say everything is okay.
    I don't think, though, that it is a machine worth the price that the company Einhell is asking.
    So, 3 stars.

    Translated from Greek ·
    1
  • See all
158,70 €
47,00 €   shipping cost