Isomat Topcoat-PAS 760 is a two-component, solvent-free aliphatic polyaspartic coating used as a final protective layer. It sets and cures quickly, allowing the area to be used soon after application, and is unaffected by ultraviolet radiation. It resists mechanical stress, abrasion and chemicals, as well as pedestrian and vehicular traffic.
It is applied over polyurethane waterproofing layers, epoxy systems, hot-spray polyurea, and industrial or decorative flooring. It is suitable for rooftops, balconies, courtyards, pavements, parking areas and swimming pools. It bears CE marking in accordance with EN 1504-2 and EN 13813 and is intended for professional use.
- Type: Aliphatic polyaspartic coating (cold-applied polyurea)
- Components: 2
- Form: Brush-applied liquid
- Colour: Grey
- Quantity: 25 kg
- Consumption: 250–400 g/m² per coat
- Walk-on time: 5 hours at 23°C
- Time until light traffic: 11 hours at 23°C
- Full curing time: 4 days at 23°C
- Hardness: Shore D 64
- Adhesion: > 3 N/mm², with concrete failure
- Impact resistance: 11.4 Nm
- VOC content: Up to 140 g/l
- Certifications: CE according to EN 1504-2 and EN 13813 (SR-B2,0-AR0,5-IR11)
- Use: Professional
Product Details
- Type
- Lubricating Liquid
- Colour
- Grey
- Application Surface
- Terrace
Additional Specifications
- Polyurethane
- Yes
- Elastomer
- No
- Acrylic
- No
- Bituminous
- No
- Cementitious
- No
- 2-Component
- Yes
Packaging
- Quantity
- 25 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.