Skroutz.mt

Sherman Sherman Welding Machine Inverter MIG with Maximum Welding Current 250A and Duty Cycle 60%
Welding Machines

Sherman Sherman Welding Machine Inverter MIG with Maximum Welding Current 250A and Duty Cycle 60%

The MIG 261M welder is a second-generation welding machine manufactured with IGBT technology. It is used for manual welding of steel and non-ferrous metals with gas shielding (MIG / MAG method) and...

The MIG 261M welder is a second-generation welding machine manufactured with IGBT technology. It is used for manual welding of steel and non-ferrous metals with gas shielding (MIG / MAG method) and with coated electrode (MMA method). It can also be used for gas welding with flux-cored wire. The device also has the capability to weld with 100 mm diameter...

See full description See full description

  • Welding Current

    250

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    9.4

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all

Welding current (max)

  1. 250 A

    from 1.109,80 €

  2. 300 A

    from 1.339,20 €

1109 80 €
Delivery by Fri, 07 Aug
83,00 €   shipping cost
Sent from Greece
From Oxytools
Greece
10 pieces
See Tools on the page of Oxytools
Review the product
Product report

Description

Description

The MIG 261M welder is a second-generation welding machine manufactured with IGBT technology. It is used for manual welding of steel and non-ferrous metals with gas shielding (MIG / MAG method) and with coated electrode (MMA method). It can also be used for gas welding with flux-cored wire. The device also has the capability to weld with 100 mm diameter wires using the Spoolgun support.

The welder can be powered by both a single-phase 230V network and a three-phase 3x400V network. The detection of the supply voltage is automatic, and the device is equipped with a cable adapter. It is equipped with a professional 4-roll wire feeder with smooth adjustment of the feeding speed. It also has smooth adjustment of the welding voltage in MIG / MAG welding and the welding current in the MMA method. The device is equipped with gas delay control, a 2T / 4T switch, and induction control which are useful for welding thin surfaces. They are protected from overload with thermal protection.

  • Supply voltage [V]: AC 230 50Hz, AC 3x400 50Hz
  • Welding methods: MIG, MMA
  • Manufacturing technology: IGBT
  • Welding current [A]: 250
  • Duty cycle [%]: 60
  • Max. current consumption [A]: 30.8 (MIG 230V), 36.5 (MMA 230V), 12.1 (MIG 3x400V), 12.8 (MMA 3x400V)
  • Max. power consumption [kVA]: 9.4 kVA (3x400V)
  • Current welding adjustment: Smooth
  • Wire spool [mm]: 200, 300
  • Wire feeding speed [m/min]: 3 - 18
  • Weight [kg]: 59
  • Dimensions (W x H x D) [mm]: 930 x 435 x 695
  • Functions: 2T / 4T, Induction adjustment, 4-roll feeder, Spool Gun option, 230 / 400V power supply

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).
Welding Current (max)
250 A

Welding Current (max): 250


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
9.4 kVA

Power: 9.4


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
25000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The MIG 261M welder is a second-generation welding machine manufactured with IGBT technology. It is used for manual welding of steel and non-ferrous metals with gas shielding (MIG / MAG method) and with coated electrode (MMA method). It can also be used for gas welding with flux-cored wire. The device also has the capability to weld with 100 mm diameter wires using the Spoolgun support.

The welder can be powered by both a single-phase 230V network and a three-phase 3x400V network. The detection of the supply voltage is automatic, and the device is equipped with a cable adapter. It is equipped with a professional 4-roll wire feeder with smooth adjustment of the feeding speed. It also has smooth adjustment of the welding voltage in MIG / MAG welding and the welding current in the MMA method. The device is equipped with gas delay control, a 2T / 4T switch, and induction control which are useful for welding thin surfaces. They are protected from overload with thermal protection.

  • Supply voltage [V]: AC 230 50Hz, AC 3x400 50Hz
  • Welding methods: MIG, MMA
  • Manufacturing technology: IGBT
  • Welding current [A]: 250
  • Duty cycle [%]: 60
  • Max. current consumption [A]: 30.8 (MIG 230V), 36.5 (MMA 230V), 12.1 (MIG 3x400V), 12.8 (MMA 3x400V)
  • Max. power consumption [kVA]: 9.4 kVA (3x400V)
  • Current welding adjustment: Smooth
  • Wire spool [mm]: 200, 300
  • Wire feeding speed [m/min]: 3 - 18
  • Weight [kg]: 59
  • Dimensions (W x H x D) [mm]: 930 x 435 x 695
  • Functions: 2T / 4T, Induction adjustment, 4-roll feeder, Spool Gun option, 230 / 400V power supply

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).
Welding Current (max)
250 A

Welding Current (max): 250


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
9.4 kVA

Power: 9.4


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
25000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.109,80 €
83,00 €   shipping cost