The best and most economical fan hub. It does its job excellently. I have bought three of these, and I will buy another in the future if needed.

It does its job, I haven't had any issues yet, unfortunately because it takes a command from a single main (Header) 4-pin port, you can't individually adjust the speed of the fans you connect for power to the Hub

very good! for the rpm of the fans, the motherboard reads the rpm from the fan that you connect to port 1.

It does exactly what it says without any problem and it also comes with double-sided tape or a magnet so that it doesn't stick out anywhere

what more could you want for this price, I got it for 3x P12 max Arctic fans which are borderline for one header although I eventually used p12 pros in the build, whenever we approach the max of the header it's good to use a Hub, it has the option of either magnetic stickers or double face stickers.

10/10! Does not support Argb! Only non Argb fans! I have installed the p12 pro pst artic 10/10! It also has a 6-year warranty, perfect!

I have connected 5 120mm and 2 140mm fans to the Hub on the motherboard, where we connect the CPU Fan, which now have the specific speeds (they are adjusted by the motherboard) and most importantly, they do not draw power from the motherboard (important) but directly from the Hub, which is powered by the power supply.

It's simply a PWM Fan Hub with 10 ports. It gets power via SATA, connects to the motherboard, and then the fans are connected to it. A small investment for budget systems that usually don't have enough ports for fans or for fans that can't be connected in parallel with each other.

Very good and economical solution for someone who doesn't have enough fan headers on their motherboard. It requires a SATA power connection from the power supply and a cable from the motherboard, which is included, so you can control the speed of all the fans (all together and not individually, so be careful!). Easy to set up, it also includes magnets so you can attach it to the case, and it allows you to connect up to 10 fans to it. I recommend it!

I got 2 pieces for 2 different setups so far, excellent. Very simple, plain, and unpretentious as a product. It also has adhesive magnets so you can attach it to the case.

The fans working perfect, the only thing that is missing is the rgb!!! With rgb are gonna be the best 120mm fans

I give it 5 stars as it does what it promises, meaning the 10 slots. The only downside that might be for some is that if you have many fans to connect there with the cables, you might not have organized cable management due to the cables, but for me, it's irrelevant as I have the case down and I don't care how it looks from the inside

Together with the Arctic fans, you have very good airflow in the case, at a very low cost and neatly organized with the fan hub.

Very nice little device, easy installation and provides enough headers to connect the fans,

But,
It works correctly only if you connect groups of fans to it, the first header reads the RPMs of the first PWM fan you plug in and synchronizes all the others based on the first one. In cases where you connect all the fans, you WON'T be able to calibrate the airflow correctly; all the fans will synchronize based on the first fan in the hub. This means you won't be able to adjust the fans individually; they will all operate the same. The best solution is to use it only for intake fans or only for exhaust fans. Only then will you be able to adjust the airflow.

I removed one star because there is no software for the hub and the manual does not explain the above.

It does its job just fine, plug 'n play. The adhesive magnets work well to stick it to the box.

Without needing instructions, in 5 minutes 4 case fans were connected to the motherboard to receive control and provide information. The magnets are very convenient so it doesn't hang and doesn't need to be permanently stuck somewhere inside.

Easy installation. Connection for up to 10 coolers. For me, since the motherboard had only one port for system fan, it was a lifesaver. One cable for power and one for signal and you're ready

Very good Fan hub for 5 euros for those who have many fans in their case, I have a Cougar Duoface Pro case with a Gigabyte B450M DS3H motherboard that has only one slot for a system fan and this fan hub saved me. You won't find a better Fan hub on the market for this price

Very economical hub for computer fans. I have had it for about 2 months and I am satisfied without any problems

If you have a box without a HUB, you don't want to get splitters and fill your PC with cables behind it, the solution is here...!

Up to 10 fans, then a cable for the motherboard and power supply, all fans in one profile from 0 to 100% depending on your Temp-curve!

It's a shame it doesn't have a double-sized one to also accommodate 10 A-RBG/RGB pins if you have them all in one!!

A very good choice for connecting multiple fans if your motherboard doesn't have many ports. It also helps with cable management, as well as the fact that you can adjust all the fans to work simultaneously at the same levels without having to make separate adjustments for each one. It fits into SSD ports, but it also comes with adhesive magnets and 3M adhesive stickers for you to choose whichever suits your needs in terms of management.

Two 140mm fans and three 120mm fans were installed. All of them are Aerocool brand with 3-pin connectors. One Corsair 4-pin fan was installed in the first position and all the others were adjusted accordingly. The other fans were connected to the PC using the provided Molex connection, so every time the computer turned on, I had a literal airplane next to me. The hub was connected to the 4-pin connector on the motherboard and they were adjusted to run at a lower speed using power control. Everything is going smoothly.
Easy, very easy installation and nice build quality. It has as many outputs as you need, it has a magnet to attach to the case, it's small and you can hide it if you want to do cable management. It's simply excellent.

Bought it a month ago. I have connected 6 PWM fans, with 3 blowing air in the bottom and 3 extracting it from the top, and I wanted them to operate at the same speed without complicated daisy chaining. It worked and continues to work perfectly!

Very good for both 3-pin fans and 4-pin (PWM, preferable). It includes adhesive and magnets for installation. It combined very well with the Arctic P12 PWM PST Case Fan 120mm with 4-Pin Connection. (https://www.skroutz.gr/s/17302586/Arctic-P12-PWM-PST-Case-Fan-120mm-me-Syndesi-4-Pin-5tmch.html)

Small, practical, and durable. The perfect solution to add extra fans to your system. I used it as a solution for a friend who bought fans without anticipating if he could power them, and 3 years since I installed it, it still works great.

Everything is good. I would prefer the magnetic tapes to be a little stronger, but it's not something very important

I have it for a while and it's great for the 5.8€ I bought it, I believe it's an okay price. It works flawlessly

I put the 4 fans of the pc on it,
I set them to 35% of their performance
and I have a constant airflow in the case (and very satisfactory) with the main characteristic... QUIET

I tried it for a small server that I have, it has a cheap motherboard that only has one header for fans, with this I connected 5 and I have 5 more ports, it works very well and of course with PWM.