Mercola Isocryl Repair Wet Apply sealant is an elastomeric, fiber-reinforced product based on solvent-borne acrylic resins, for waterproofing terraces, roofs and other exterior surfaces. It can be applied with a brush or spatula to dry or wet surfaces and covers cracks, joints and other difficult areas, including places where water pools. In most cases, it can be applied without a primer and retains its mechanical properties at temperatures from -15 °C to 70 °C.
It is suitable for surfaces made of metal, bituminous materials, cement-based materials, ceramic, brick, PVC, concrete and plaster. Where pedestrian traffic is required, cover it with a protective material such as ceramic tiles. The surface must be clean and sound, and the product must be stirred thoroughly before use.
- Form: Thick paste
- Color: Terracotta
- Capacity: 0.75 L
- Composition: Solvent-borne acrylic resins with fibers
- Elastomeric: Yes
- Application: With a brush or spatula
- Suitable surfaces: Terraces, roof tiles, metal, bituminous materials, cement-based surfaces, ceramic, brick, PVC, concrete and plaster
- Surface condition: Dry or wet
- Coverage: 1–2 m²/L, depending on the application
- Application temperature: 5 °C to 35 °C
- Temperature resistance: From -15 °C to 70 °C
- Initial drying time: 2–4 hours at 20 °C
- Final drying time: 24–48 hours at 20 °C
- Use: Exterior
- Dilution: Not required
- Tool cleaning: With white spirit or nitro thinner
Product Details
- Type
- Lubricating Liquid
- Colour
- Red
- Application Surface
- Terrace, Tiles
- Application Surface Material
- Metallic, Asphalt Material, Cementitious, Ceramic, Brick, PVC, Concrete, Plaster
Additional Specifications
- Polyurethane
- Yes
- Elastomer
- Yes
- Acrylic
- Yes
- Bituminous
- No
- Cementitious
- Yes
- 2-Component
- No
Packaging
- Capacity
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.