It seems to be well made and is definitely worth the money; the installation was a bit difficult for me, but I figured it out afterward

Very good and it seems durable. Be very careful with the nuts; one of mine got stuck and I had to buy the same product again. But it has been convenient for me with bottles, soft drinks, as well as slim thermoses. It also needs some plastic so it doesn’t touch the handlebar directly, which is not included in the package.

It doesn't fit the classic coffee cups... I have to twist it like a screw to tighten it without the cup touching the bottom. If you want something economical to put some water in, let's say, it's excellent!

I had ordered for the handlebar, but it finally arrived for the mirror base. Even though it was a mistake, it suits me better.

I have been using it for 2-3 years, I usually get the product from a local store because I need it immediately most of the time.
Every 4-5 months it breaks, it doesn't need to be tightened excessively and there is a screw to adjust it to the height you want. Be very careful to unscrew it well, but not to remove the screw, and use gentle movements because otherwise it breaks

Very good case, it lightly squeezes the fredo to keep it in place and it has an adjustment if you put something narrower like a water bottle so you can tighten it. Also very sturdy, not the bad plastic

it barely takes coffee from outside like freddo and such. it shakes and vibrates, after a few times coffee spills and you get dirty. but generally it doesn't break like some others. ideal for anything that closes or for water. coffee only if you have a little inside and a big cup so it doesn't spill out

with the slightest vibration there is a problem.. only for a well-closed bottle..
I wouldn't recommend it for a disposable coffee cup.

The base is metallic, well-made, very stable and has been incredibly convenient for me. It should cost more than €20 with such quality. I haven't used a disposable coffee cup yet.

Very good product. Unlike other Chinese ones, it fits the standard paper cup for freddo. Stable and sturdy. It gives you confidence that you won't end up taking a "bath" in coffee. Also, the materials and colors used make it look like an expensive / premium product. Recommended.

Very good! It's just fine for both paper cups and larger ones like small thermoses, etc.

Wasted money. You tighten and tighten and tighten and it still moves. I try to unscrew it to see why it's moving and it won't unscrew. The nut slipped inside the plastic base and spins crazily. I had to cut the plastic to take it out and throw it away...

the best for coffee lovers! it easily fits a water bottle and a regular-sized thermos, it goes in with a bit of effort and it's very good. Worth the money

Placed on the motorcycle bars, very convenient and of good quality, but a big flaw, which is easily fixed, so I didn't remove a star, is that it DOES NOT HAVE a rubber in the package, so you need to find your own, otherwise it won't grip on a metal bar.

Unacceptable, it broke as if it were made of cardboard. Really the worst thing I've ever bought, and I wonder why the company has very good products. But really, nothing but fake plastic.

It is metallic, painted with electrostatic paint! It barely fits the coffee cup fully open. Note that it only screws onto a horizontal bar properly! I thought it rotates but I was wrong. With a small modification, I turned it to hold vertically.

It comes in a quality case with 2 Allen keys and a 10mm wrench for installation and adjustment.

It is very good. Metallic and adjustable. I put it on the machine's railing. One addition that is needed is a small rubber (like a tube) inside the tightening ring.

Its quality is top-notch. It is very beautiful. Its joints are as they should be. It can be adjusted to various positions (height, angles, etc.).

The case is simply unbeatable. Metal, sturdy construction. It doesn't care about potholes or speed.. I recommend it with closed eyes

When screwed in, it is sturdy as a construction. The materials used are excellent (considering the cost), the diameter adjusts so that it can fit different sizes of glasses

Very good, maybe if it were a point bigger and could fit the typical takeaway coffee it would be much BETTER

I can confidently say that it is the best coffee base! No plastic on it and it withstands everything. Adjustable and you have two options to take it for the mirror or for the machine's railings or anywhere...

I put it on the sym 125. It is solid, only water fits and it stays quite stable. If you want a thermos for coffee, only a specific brand. I have a thermos from CHILLY'S and it doesn't stay at all, it fell off in the first few meters.

It's nice for the money, I would like it to have a rubber band to fit between the base and the handlebar so it doesn't slip. Other than that, it seems well made.

The wasp trap relaxes and if you try to touch it, it breaks. It needs silicone spray on all the screws so they don't rust

Perfect cup holder, I installed it on my PCX

It is sturdy and the best in this aspect, but it can only fit a relatively large paper take-away cup, none of the small thermoses fit

Very good for its price. It will probably be useless for a bottle of water or something else in this shape. Wearing a helmet, I don't think anyone would want to drink coffee and need the immediacy of such a cup holder, unless they don't have a bag with them.

In terms of quality, it is quite good as its construction is metallic. It holds whatever you put inside very well and you don't have to worry about it falling out on the road. Of course, when it is empty, although it has a screw at the bottom that keeps it stable, it makes a few creaks and can be heard. Overall, it does its job very well for what it was made for.

I am updating after about 18 months of use, it gave up the ghost. The moving part of the case broke and it's going to the trash. In the end, not so reliable. Minus two more stars from me.

Durable and functional. I put it on the handlebars of the bike.