The Michelin Vigil analog tire pressure gauge measures pressure on Schrader valves. Its reading is displayed in bar and psi, and its compact size makes it easy to carry.
Type: Analog
Valves: Schrader...
The Michelin Vigil analog tire pressure gauge measures pressure on Schrader valves. Its reading is displayed in bar and psi, and its compact size makes it easy to carry.
What can I say... I used to have a little stick to measure my tires, but I stopped using it and started inflating them at the gas station... Suddenly, my 2018 Hyundai Tucson showed tire pressure of 2.1... Oh no, I thought... I’d better quickly inflate them with my compressor... I asked AI, and it told me the Hyundai was more reliable when it came to measuring... I measured with my compressor = 2.4, while my car showed 2.1... Hold on, I thought, something’s going on here... So I decided to trust the car and set it to 2.7, and after driving around a little, the tires showed 2.4... That was when I decided to buy this tool... And IN THE END, the car was right! My compressor was showing 0.3 bar too much. And all this time, I’d been driving the other car, a Toyota Aygo, with 0.3 bar less pressure... The compressor showed 2, so I should have set it to 2.3, but in reality it was getting 2.1. In other words, I hadn’t inflated the Aygo’s tires for quite a while, and I was driving with 1.7 bar... I could hear a noise from the front left tire... I suspect it was due to the severe pressure loss = 1.7 bar instead of the 2.3 recommended in the instructions... The Hyundai Tucson and this amazing Michelin tool opened my eyes
Τι να πω... είχα παλιά ένα μικρό στικάκι για να μετράω την μηχανή μου και έπαψα να το χρησιμοποιώ και έβαζα αέρα στο βενζινάδικο ... ξαφνικά το αυτοκίνητό μου Ηundai Tucson 2018 μου δείχνει 2,1 πίεση στα λάστιχα ... ωχ λέω ... να τους βάλω γρήγορα αέρα με το κομπρεσέρ μου... ρώτησα το ΑΙ και μου είπε ότι το Hundai είναι ποιο αξιόπιστο στην μέτρηση.. μετράω με το κομπρεσέρ μού = 2,4 και το αυτοκίνητο μου έδειχνε 2,1... όπας λέω εδώ κάτι τρέχει ... και λέω λοιπόν να εμπιστευτώ το αυτοκίνητο και βάζω 2,7 στο αυτοκίνητο και μόλις έκανα λίγο βόλτα τα λάστιχα έδειξαν 2,4 ... και τότε ήταν που αποφάσισα να πάρω αυτό το εργαλείο ... και ΤΕΛΙΚΑ το αυτοκίνητο είχε δίκιο ! το κομπρεσέρ μου, μου έδειχνε 0,3 μπαρ παραπάνω. και τόσο καιρό οδηγούσα το άλλο αυτοκίνητο το Toyota Aygo με 0,3 μπάρ λιγότερα ... έδειχνε στο κομπρεσερ 2 έπρεπα να βάλω 2,3 και τελικά στην πραγματικότητα έπαιρνε 2,1 δηλαδή τα λάστιχα το Aygo είχα να τους βάλω κάμποσο καιρό αέρα και πήγαινα με 1,7 μπαρ... και άκουγα έναν θόρυβο στο μπροστινό αριστερό λάστιχο ... που θα υποψιαστώ ότι ήταν η φοβερή μείωση πίεσης= 1,7 μπαρ αντί για 2,3 που λένε οι οδηγίες.... μου άνοιξε τα μάτια το Hundai Tuscon και αυτό το καταπληκτικό εργαλείο της Michelin
I must have had it for 20+ years!! I have verified it several times with vulcanizers and it never lost pressure. Now the reset button has hardened and it's not instantaneous like it used to be, but it still works and remains accurate! The most useful tool I've ever had..
πρέπει να το έχω 20+χρ!! το έχω επαληθεύσει αρκετές φορές με βουλκανιζατέρ και δεν έχανε ποτέ. πλέον έχει σκληρύνει το κουμπί επαναφοράς και δεν είναι ακαριαίο όπως ήταν αλλά εξακολουθεί και να δουλεύει και να είναι ακριβές! ότι πιο χρήσιμο εργαλείο είχα..
What can I say... I used to have a little stick to measure my tires, but I stopped using it and started inflating them at the gas station... Suddenly, my 2018 Hyundai Tucson showed tire pressure of 2.1... Oh no, I thought... I’d better quickly inflate them with my compressor... I asked AI, and it told me the Hyundai was more reliable when it came to measuring... I measured with my compressor = 2.4, while my car showed 2.1... Hold on, I thought, something’s going on here... So I decided to trust the car and set it to 2.7, and after driving around a little, the tires showed 2.4... That was when I decided to buy this tool... And IN THE END, the car was right! My compressor was showing 0.3 bar too much. And all this time, I’d been driving the other car, a Toyota Aygo, with 0.3 bar less pressure... The compressor showed 2, so I should have set it to 2.3, but in reality it was getting 2.1. In other words, I hadn’t inflated the Aygo’s tires for quite a while, and I was driving with 1.7 bar... I could hear a noise from the front left tire... I suspect it was due to the severe pressure loss = 1.7 bar instead of the 2.3 recommended in the instructions... The Hyundai Tucson and this amazing Michelin tool opened my eyes
Τι να πω... είχα παλιά ένα μικρό στικάκι για να μετράω την μηχανή μου και έπαψα να το χρησιμοποιώ και έβαζα αέρα στο βενζινάδικο ... ξαφνικά το αυτοκίνητό μου Ηundai Tucson 2018 μου δείχνει 2,1 πίεση στα λάστιχα ... ωχ λέω ... να τους βάλω γρήγορα αέρα με το κομπρεσέρ μου... ρώτησα το ΑΙ και μου είπε ότι το Hundai είναι ποιο αξιόπιστο στην μέτρηση.. μετράω με το κομπρεσέρ μού = 2,4 και το αυτοκίνητο μου έδειχνε 2,1... όπας λέω εδώ κάτι τρέχει ... και λέω λοιπόν να εμπιστευτώ το αυτοκίνητο και βάζω 2,7 στο αυτοκίνητο και μόλις έκανα λίγο βόλτα τα λάστιχα έδειξαν 2,4 ... και τότε ήταν που αποφάσισα να πάρω αυτό το εργαλείο ... και ΤΕΛΙΚΑ το αυτοκίνητο είχε δίκιο ! το κομπρεσέρ μου, μου έδειχνε 0,3 μπαρ παραπάνω. και τόσο καιρό οδηγούσα το άλλο αυτοκίνητο το Toyota Aygo με 0,3 μπάρ λιγότερα ... έδειχνε στο κομπρεσερ 2 έπρεπα να βάλω 2,3 και τελικά στην πραγματικότητα έπαιρνε 2,1 δηλαδή τα λάστιχα το Aygo είχα να τους βάλω κάμποσο καιρό αέρα και πήγαινα με 1,7 μπαρ... και άκουγα έναν θόρυβο στο μπροστινό αριστερό λάστιχο ... που θα υποψιαστώ ότι ήταν η φοβερή μείωση πίεσης= 1,7 μπαρ αντί για 2,3 που λένε οι οδηγίες.... μου άνοιξε τα μάτια το Hundai Tuscon και αυτό το καταπληκτικό εργαλείο της Michelin
I must have had it for 20+ years!! I have verified it several times with vulcanizers and it never lost pressure. Now the reset button has hardened and it's not instantaneous like it used to be, but it still works and remains accurate! The most useful tool I've ever had..
πρέπει να το έχω 20+χρ!! το έχω επαληθεύσει αρκετές φορές με βουλκανιζατέρ και δεν έχανε ποτέ. πλέον έχει σκληρύνει το κουμπί επαναφοράς και δεν είναι ακαριαίο όπως ήταν αλλά εξακολουθεί και να δουλεύει και να είναι ακριβές! ότι πιο χρήσιμο εργαλείο είχα..
The Michelin Vigil analog tire pressure gauge measures pressure on Schrader valves. Its reading is displayed in bar and psi, and its compact size makes it easy to carry.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
What can I say... I used to have a little stick to measure my tires, but I stopped using it and started inflating them at the gas station... Suddenly, my 2018 Hyundai Tucson showed tire pressure of 2.1... Oh no, I thought... I’d better quickly inflate them with my compressor... I asked AI, and it told me the Hyundai was more reliable when it came to measuring... I measured with my compressor = 2.4, while my car showed 2.1... Hold on, I thought, something’s going on here... So I decided to trust the car and set it to 2.7, and after driving around a little, the tires showed 2.4... That was when I decided to buy this tool... And IN THE END, the car was right! My compressor was showing 0.3 bar too much. And all this time, I’d been driving the other car, a Toyota Aygo, with 0.3 bar less pressure... The compressor showed 2, so I should have set it to 2.3, but in reality it was getting 2.1. In other words, I hadn’t inflated the Aygo’s tires for quite a while, and I was driving with 1.7 bar... I could hear a noise from the front left tire... I suspect it was due to the severe pressure loss = 1.7 bar instead of the 2.3 recommended in the instructions... The Hyundai Tucson and this amazing Michelin tool opened my eyes
Τι να πω... είχα παλιά ένα μικρό στικάκι για να μετράω την μηχανή μου και έπαψα να το χρησιμοποιώ και έβαζα αέρα στο βενζινάδικο ... ξαφνικά το αυτοκίνητό μου Ηundai Tucson 2018 μου δείχνει 2,1 πίεση στα λάστιχα ... ωχ λέω ... να τους βάλω γρήγορα αέρα με το κομπρεσέρ μου... ρώτησα το ΑΙ και μου είπε ότι το Hundai είναι ποιο αξιόπιστο στην μέτρηση.. μετράω με το κομπρεσέρ μού = 2,4 και το αυτοκίνητο μου έδειχνε 2,1... όπας λέω εδώ κάτι τρέχει ... και λέω λοιπόν να εμπιστευτώ το αυτοκίνητο και βάζω 2,7 στο αυτοκίνητο και μόλις έκανα λίγο βόλτα τα λάστιχα έδειξαν 2,4 ... και τότε ήταν που αποφάσισα να πάρω αυτό το εργαλείο ... και ΤΕΛΙΚΑ το αυτοκίνητο είχε δίκιο ! το κομπρεσέρ μου, μου έδειχνε 0,3 μπαρ παραπάνω. και τόσο καιρό οδηγούσα το άλλο αυτοκίνητο το Toyota Aygo με 0,3 μπάρ λιγότερα ... έδειχνε στο κομπρεσερ 2 έπρεπα να βάλω 2,3 και τελικά στην πραγματικότητα έπαιρνε 2,1 δηλαδή τα λάστιχα το Aygo είχα να τους βάλω κάμποσο καιρό αέρα και πήγαινα με 1,7 μπαρ... και άκουγα έναν θόρυβο στο μπροστινό αριστερό λάστιχο ... που θα υποψιαστώ ότι ήταν η φοβερή μείωση πίεσης= 1,7 μπαρ αντί για 2,3 που λένε οι οδηγίες.... μου άνοιξε τα μάτια το Hundai Tuscon και αυτό το καταπληκτικό εργαλείο της Michelin
I must have had it for 20+ years!! I have verified it several times with vulcanizers and it never lost pressure. Now the reset button has hardened and it's not instantaneous like it used to be, but it still works and remains accurate! The most useful tool I've ever had..
πρέπει να το έχω 20+χρ!! το έχω επαληθεύσει αρκετές φορές με βουλκανιζατέρ και δεν έχανε ποτέ. πλέον έχει σκληρύνει το κουμπί επαναφοράς και δεν είναι ακαριαίο όπως ήταν αλλά εξακολουθεί και να δουλεύει και να είναι ακριβές! ότι πιο χρήσιμο εργαλείο είχα..
What can I say... I used to have a little stick to measure my tires, but I stopped using it and started inflating them at the gas station... Suddenly, my 2018 Hyundai Tucson showed tire pressure of 2.1... Oh no, I thought... I’d better quickly inflate them with my compressor... I asked AI, and it told me the Hyundai was more reliable when it came to measuring... I measured with my compressor = 2.4, while my car showed 2.1... Hold on, I thought, something’s going on here... So I decided to trust the car and set it to 2.7, and after driving around a little, the tires showed 2.4... That was when I decided to buy this tool... And IN THE END, the car was right! My compressor was showing 0.3 bar too much. And all this time, I’d been driving the other car, a Toyota Aygo, with 0.3 bar less pressure... The compressor showed 2, so I should have set it to 2.3, but in reality it was getting 2.1. In other words, I hadn’t inflated the Aygo’s tires for quite a while, and I was driving with 1.7 bar... I could hear a noise from the front left tire... I suspect it was due to the severe pressure loss = 1.7 bar instead of the 2.3 recommended in the instructions... The Hyundai Tucson and this amazing Michelin tool opened my eyes
Τι να πω... είχα παλιά ένα μικρό στικάκι για να μετράω την μηχανή μου και έπαψα να το χρησιμοποιώ και έβαζα αέρα στο βενζινάδικο ... ξαφνικά το αυτοκίνητό μου Ηundai Tucson 2018 μου δείχνει 2,1 πίεση στα λάστιχα ... ωχ λέω ... να τους βάλω γρήγορα αέρα με το κομπρεσέρ μου... ρώτησα το ΑΙ και μου είπε ότι το Hundai είναι ποιο αξιόπιστο στην μέτρηση.. μετράω με το κομπρεσέρ μού = 2,4 και το αυτοκίνητο μου έδειχνε 2,1... όπας λέω εδώ κάτι τρέχει ... και λέω λοιπόν να εμπιστευτώ το αυτοκίνητο και βάζω 2,7 στο αυτοκίνητο και μόλις έκανα λίγο βόλτα τα λάστιχα έδειξαν 2,4 ... και τότε ήταν που αποφάσισα να πάρω αυτό το εργαλείο ... και ΤΕΛΙΚΑ το αυτοκίνητο είχε δίκιο ! το κομπρεσέρ μου, μου έδειχνε 0,3 μπαρ παραπάνω. και τόσο καιρό οδηγούσα το άλλο αυτοκίνητο το Toyota Aygo με 0,3 μπάρ λιγότερα ... έδειχνε στο κομπρεσερ 2 έπρεπα να βάλω 2,3 και τελικά στην πραγματικότητα έπαιρνε 2,1 δηλαδή τα λάστιχα το Aygo είχα να τους βάλω κάμποσο καιρό αέρα και πήγαινα με 1,7 μπαρ... και άκουγα έναν θόρυβο στο μπροστινό αριστερό λάστιχο ... που θα υποψιαστώ ότι ήταν η φοβερή μείωση πίεσης= 1,7 μπαρ αντί για 2,3 που λένε οι οδηγίες.... μου άνοιξε τα μάτια το Hundai Tuscon και αυτό το καταπληκτικό εργαλείο της Michelin
I must have had it for 20+ years!! I have verified it several times with vulcanizers and it never lost pressure. Now the reset button has hardened and it's not instantaneous like it used to be, but it still works and remains accurate! The most useful tool I've ever had..
πρέπει να το έχω 20+χρ!! το έχω επαληθεύσει αρκετές φορές με βουλκανιζατέρ και δεν έχανε ποτέ. πλέον έχει σκληρύνει το κουμπί επαναφοράς και δεν είναι ακαριαίο όπως ήταν αλλά εξακολουθεί και να δουλεύει και να είναι ακριβές! ότι πιο χρήσιμο εργαλείο είχα..