With the REV series, Sharkoon has turned traditional case design upside down. The REV300 is no exception here and, as before, the interior can be viewed through a tempered glass side panel, which is located on the right side of the case. Ideal for anyone who wants to place their powerful gaming system on the left side of their setup. What is also REVolutionary is the installation of all components around a motherboard rotated by 90 degrees.
Make your revolution in gaming with the REV300, an innovative ATX tower designed for high performance. The well-thought-out design gives you a completely new experience when assembling your gaming build.
The mesh front panel and seven pre-installed PWM fans optimize airflow and maximize your hardware's performance. Thanks to the guided LED fans and the tempered glass side panel, everything integrated into the REV300 will be showcased in the best possible way.
Revolution instead of Tradition
With the REV series, Sharkoon has turned traditional case design upside down. The REV300 is no exception here and, as before, the interior can be viewed through a tempered glass side panel, which is located on the right side of the case. Ideal for anyone who wants to place their powerful gaming system on the left side of their setup. What is also REVolutionary is the installation of all components around a motherboard rotated by 90 degrees.
The cables and connections from the motherboard are routed to a special cable compartment at the top of the case. The input/output panel not only provides four conventional USB connections but also offers a port for devices that require a USB Type-C connection.
Generously built and elegantly designed
The REV300 stands out thanks to its imposing size and elegant appearance. The geometric designs on the corners of the mesh-covered front panel create a visual emphasis and direct the focal point to the lighting of the RGB LED fans. The impressive lighting of the REV300 is further highlighted by the minimalist design of the case. Seven fully addressable RGB LED fans immerse the large case in bright colors, turning it into a dream for RGB enthusiasts.
Maximum Airflow. Maximum Power
Anyone who owns a demanding gaming system knows that proper airflow is essential. The REV300 is better equipped for such a task. Seven fans are already pre-installed, so you are ready to start and benefit from maximum cooling for your hardware.
A mesh grille extends across the entire front, paving the way for ample air, which is supplied by three 140 mm RGB LED fans. Three more 120 mm RGB LED fans are installed at the back. By adding an additional 120 mm RGB LED fan under the top panel, an efficient airflow is created that keeps systems cool even when running at full load. If water cooling is required, two radiators can be installed simultaneously within the REV300. A 360 mm radiator can be installed at the back, while there is even space for a giant 420 mm radiator behind the front panel.
For systems worth showcasing
The REV300 provides a deep view of the interior of the case and the installed hardware components. A tempered glass side panel on the right side of the case allows for a full view of the system. The side panel conveniently rests on hinges at the back, making it easy to open and close. A magnetic closure ensures that everything shuts securely. Screws or other distracting elements are completely out of sight, and the hardware components are easily accessible. Along with the lighting from a total of seven RGB LED fans, the presentation is perfect.
Make room for building your monster
No case in the REV series has been as large as the REV300. Consequently, the ATX case creates ample space for large and powerful hardware. There is room here for everything that needs it. Graphics cards up to 34.5 cm in length can be easily installed. A power supply with a length of 27 cm or a CPU cooler with a height of 17.7 cm will easily find space here. If massive data storage is required, you can equip the REV300 with four 3.5" storage drives or five 2.5" storage drives. Additionally, dust filters help keep the interior of the case clean. A particularly large foldable dust filter is mounted on the bottom panel to prevent dust from entering from underneath the case.
Main Specifications
- Colour
- Black
- Size
- Midi Tower
- Compatible Motherboard Type
- ATX, Extended ATX, Micro ATX, Mini ITX
Dimensions
- Height
- 550 mm
- Width
- 238 mm
- Length
- 501 mm
Internal Spaces
- Maximum Graphics Card Length
- 345 mm
- Maximum Processor Heatsink Height
- 177 mm
Drive Bays
- Internal Hub 3.5"
- 4
- Internal Hub 2.5"
- 5
Fan Positions
- Front
- 3
- Rear
- 3
- Top Positions
- 1
Specifications
- Connectivity
- Audio, USB 2.0, USB 3.0, USB-C
- Extras
- RGB Lighting, Side Window
- Gaming
- Yes
- Airflow
- No
- Home & Office
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.