Skroutz.mt

Flex LE 12-3 100 WET, PRCD Electric Eccentric Sander 115mm Electric 1150W with Speed Control 378461
Sanders

Flex LE 12-3 100 WET, PRCD Electric Eccentric Sander 115mm Electric 1150W with Speed Control 378461 Code: 378461

LE 12-3 100 WET-PRCD Stone Polisher 1150W

  • Maximum Disc: 115 mm
  • No Load Speed: 1200-3700 rpm
  • Power: 1150 watt
  • Weight: 2.4 kg
  • Spindle Thread: M14
  • Cable: 4m
  • Reinforced Handle (368709)
  • Velcro Strap...

LE 12-3 100 WET-PRCD Stone Polisher 1150W

  • Maximum Disc: 115 mm
  • No Load Speed: 1200-3700 rpm
  • Power: 1150 watt
  • Weight: 2.4 kg
  • Spindle Thread: M14
  • Cable: 4m
  • Reinforced Handle (368709)
  • Velcro Strap (364169)

Stone polisher with operator protection switch GFCI integrated into the cable. It features electronic control for speed adjustment, speed stabilization,...

See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Soft Start

    Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 2400 gr
  • See all
582 99 €
Delivery by Fri, 26 Jun
14,00 €   shipping cost
Sent from Greece
From Mpokias Building Solutions
Greece
2 pieces
See Power Tools on the page of Mpokias Building Solutions
Review the product
Product report

Description

Description

LE 12-3 100 WET-PRCD Stone Polisher 1150W

  • Maximum Disc: 115 mm
  • No Load Speed: 1200-3700 rpm
  • Power: 1150 watt
  • Weight: 2.4 kg
  • Spindle Thread: M14
  • Cable: 4m
  • Reinforced Handle (368709)
  • Velcro Strap (364169)

Stone polisher with operator protection switch GFCI integrated into the cable. It features electronic control for speed adjustment, speed stabilization, soft start, and overload protection. Provides high torque for maximum material removal and excellent surface quality. With special stator coating for additional protection against dust wear, ensuring long life. The housing-handle facilitates handling and precise work. The new water supply and control system remains under the housing, facilitating accurate dosing. The ergonomic grip handle is positioned above the accessory holding pad. Includes a 2m flexible water hose with a brass quick connector for a 1/2'' water hose.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
378461

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
1150 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Net Weight
2400 gr
Cable Length
4 m
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
3700 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
Yes
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
115 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

LE 12-3 100 WET-PRCD Stone Polisher 1150W

  • Maximum Disc: 115 mm
  • No Load Speed: 1200-3700 rpm
  • Power: 1150 watt
  • Weight: 2.4 kg
  • Spindle Thread: M14
  • Cable: 4m
  • Reinforced Handle (368709)
  • Velcro Strap (364169)

Stone polisher with operator protection switch GFCI integrated into the cable. It features electronic control for speed adjustment, speed stabilization, soft start, and overload protection. Provides high torque for maximum material removal and excellent surface quality. With special stator coating for additional protection against dust wear, ensuring long life. The housing-handle facilitates handling and precise work. The new water supply and control system remains under the housing, facilitating accurate dosing. The ergonomic grip handle is positioned above the accessory holding pad. Includes a 2m flexible water hose with a brass quick connector for a 1/2'' water hose.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
378461

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
1150 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Net Weight
2400 gr
Cable Length
4 m
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
3700 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
Yes
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
115 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

582,99 €
14,00 €   shipping cost