Skroutz.mt

Flex Electric Eccentric Sander 150mm Electric 400W with Speed Control and with Suction System 486809
Sanders

Flex Electric Eccentric Sander 150mm Electric 400W with Speed Control and with Suction System 486809

ORE 3-150 EC SET Random Orbital Sander 400W 150mm

  • Nominal Power: 400W
  • No-load speed: 6000-10000 min-1
  • No-load oscillation rate: 12000 - 20000 min-1
  • Oscillation range: 3mm
  • Sanding pad: 150mm
  • Abrasive...

ORE 3-150 EC SET Random Orbital Sander 400W 150mm

  • Nominal Power: 400W
  • No-load speed: 6000-10000 min-1
  • No-load oscillation rate: 12000 - 20000 min-1
  • Oscillation range: 3mm
  • Sanding pad: 150mm
  • Abrasive paper attachment: Velcro
  • Dust extraction hose connection: 27mm
  • Cable: 4m
  • Weight: 1.65kg

Includes:

  • Sanding pad
  • PES microfilter cartridge with filter
  • Allen key
    • ...
See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    3

    General sanding, finishing of wood or paint.

  • Oscillations

    • High number of strokes → more intense and faster sanding
    • Low number → gentler, suitable for sensitive surfaces

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 1650 gr
  • See all
324 99 €
Delivery by Mon, 06 Jul
14,00 €   shipping cost
Sent from Greece
From Mpokias Building Solutions
Greece
2 pieces
See Power Tools on the page of Mpokias Building Solutions
Review the product
Product report

Description

Description

ORE 3-150 EC SET Random Orbital Sander 400W 150mm

  • Nominal Power: 400W
  • No-load speed: 6000-10000 min-1
  • No-load oscillation rate: 12000 - 20000 min-1
  • Oscillation range: 3mm
  • Sanding pad: 150mm
  • Abrasive paper attachment: Velcro
  • Dust extraction hose connection: 27mm
  • Cable: 4m
  • Weight: 1.65kg

Includes:

  • Sanding pad
  • PES microfilter cartridge with filter
  • Allen key
  • L-Boxx 238 case

Description:

  • Brushless motor for greater efficiency and longer lifespan
  • PES filter cartridge with cyclone function for effective dust-free operation
  • User-friendly 150mm random orbital sander with excellent ergonomics and balance, for low-vibration operation
  • Velcro pad with multi-hole system for optimal dust extraction, suitable for all common 150mm abrasives
  • With built-in brake

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
400 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Eccentricity
3 mm

Eccentricity: 3

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Net Weight
1650 gr
Cable Length
4 m
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
10000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Pulses
20000 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
Yes

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

ORE 3-150 EC SET Random Orbital Sander 400W 150mm

  • Nominal Power: 400W
  • No-load speed: 6000-10000 min-1
  • No-load oscillation rate: 12000 - 20000 min-1
  • Oscillation range: 3mm
  • Sanding pad: 150mm
  • Abrasive paper attachment: Velcro
  • Dust extraction hose connection: 27mm
  • Cable: 4m
  • Weight: 1.65kg

Includes:

  • Sanding pad
  • PES microfilter cartridge with filter
  • Allen key
  • L-Boxx 238 case

Description:

  • Brushless motor for greater efficiency and longer lifespan
  • PES filter cartridge with cyclone function for effective dust-free operation
  • User-friendly 150mm random orbital sander with excellent ergonomics and balance, for low-vibration operation
  • Velcro pad with multi-hole system for optimal dust extraction, suitable for all common 150mm abrasives
  • With built-in brake

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
400 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Eccentricity
3 mm

Eccentricity: 3

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Net Weight
1650 gr
Cable Length
4 m
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
10000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Pulses
20000 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
Yes

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

324,99 €
14,00 €   shipping cost