Skroutz.mt

Elmark 59502 Angle Grinder 180mm Electric Power 2000W
Angle Grinders

Elmark 59502 Angle Grinder 180mm Electric Power 2000W

Technical Specifications

  • Power: 2000W
  • Brand: ELMARK
  • Cable Length: 2000mm
  • Operating Voltage: 230V
  • Device Type: Angle grinder
  • Warranty: 5+0
  • No-load Speed: 6500
  • Thread Size: M14
  • Usage: Professional
  • Disc...

Technical Specifications

  • Power: 2000W
  • Brand: ELMARK
  • Cable Length: 2000mm
  • Operating Voltage: 230V
  • Device Type: Angle grinder
  • Warranty: 5+0
  • No-load Speed: 6500
  • Thread Size: M14
  • Usage: Professional
  • Disc Diameter: 180mm
See full description See full description

  • Power

    The more watts, the more power the wheel will have to cut even harder materials (e.g. thick steel) and the more endurance it will have to work for longer periods without problems.
    2. For example:
    - 500W: Suitable for polishing
    - 1000W: Suitable for grinding
    - 1000W and above: Suitable for cutting

  • Maximum Disc Diameter

    From 115mm to 150mm, it satisfactorily covers most amateur and professional tasks. The cutting depth ranges from 30mm to 40mm. A smaller disc diameter means that the wheel will be more flexible for simple tasks (e.g. electrical, plumbing, or DIY projects).

    From 180mm and above, it concerns industrial applications that require a larger cutting/sanding surface. The cutting depth is from 70mm and above.
  • See all
Review the product
Product report

Description

Description

Technical Specifications

  • Power: 2000W
  • Brand: ELMARK
  • Cable Length: 2000mm
  • Operating Voltage: 230V
  • Device Type: Angle grinder
  • Warranty: 5+0
  • No-load Speed: 6500
  • Thread Size: M14
  • Usage: Professional
  • Disc Diameter: 180mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Power Source
Electric

Power Source

Electric
Suitable for long and demanding work.
Maximum Motor Speed
6500 rpm

Maximum Motor Speed

The faster the speed, the easier the wheel can cut through material. Wheels with smaller diameter (up to 150mm disc diameter) typically operate at 10,000 rpm, while those with larger diameter (with disc diameter above 180mm) operate at 6,500 rpm.
Thread
M14

Thread

It is the part of the tool's shaft where the cutting or grinding disc is attached.
Maximum Disc Diameter
180 mm

Maximum Disc Diameter

From 115mm to 150mm, it satisfactorily covers most amateur and professional tasks. The cutting depth ranges from 30mm to 40mm. A smaller disc diameter means that the wheel will be more flexible for simple tasks (e.g. electrical, plumbing, or DIY projects).

From 180mm and above, it concerns industrial applications that require a larger cutting/sanding surface. The cutting depth is from 70mm and above.

Battery Specifications

Lithium
No

Current Specifications

Power
2000 W

Power

The more watts, the more power the wheel will have to cut even harder materials (e.g. thick steel) and the more endurance it will have to work for longer periods without problems.
2. For example:
- 500W: Suitable for polishing
- 1000W: Suitable for grinding
- 1000W and above: Suitable for cutting
Cable Length
2 m

Features & Functions

Speed Adjustment
No

Speed Adjustment

Helps with tasks that require less speed and more detail such as sanding, polishing, DIY projects.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.
Soft Start
No

Soft Start

Feature that controls the starting speed of the tool when it is activated, so that it does not start abruptly at maximum torque.
Keyless Guard Adjustment
No
With Brake
No
Keyless Disc Change
No

Accessories

Carrying Case
Without
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Technical Specifications

  • Power: 2000W
  • Brand: ELMARK
  • Cable Length: 2000mm
  • Operating Voltage: 230V
  • Device Type: Angle grinder
  • Warranty: 5+0
  • No-load Speed: 6500
  • Thread Size: M14
  • Usage: Professional
  • Disc Diameter: 180mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Power Source
Electric

Power Source

Electric
Suitable for long and demanding work.
Maximum Motor Speed
6500 rpm

Maximum Motor Speed

The faster the speed, the easier the wheel can cut through material. Wheels with smaller diameter (up to 150mm disc diameter) typically operate at 10,000 rpm, while those with larger diameter (with disc diameter above 180mm) operate at 6,500 rpm.
Thread
M14

Thread

It is the part of the tool's shaft where the cutting or grinding disc is attached.
Maximum Disc Diameter
180 mm

Maximum Disc Diameter

From 115mm to 150mm, it satisfactorily covers most amateur and professional tasks. The cutting depth ranges from 30mm to 40mm. A smaller disc diameter means that the wheel will be more flexible for simple tasks (e.g. electrical, plumbing, or DIY projects).

From 180mm and above, it concerns industrial applications that require a larger cutting/sanding surface. The cutting depth is from 70mm and above.

Battery Specifications

Lithium
No

Current Specifications

Power
2000 W

Power

The more watts, the more power the wheel will have to cut even harder materials (e.g. thick steel) and the more endurance it will have to work for longer periods without problems.
2. For example:
- 500W: Suitable for polishing
- 1000W: Suitable for grinding
- 1000W and above: Suitable for cutting
Cable Length
2 m

Features & Functions

Speed Adjustment
No

Speed Adjustment

Helps with tasks that require less speed and more detail such as sanding, polishing, DIY projects.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.
Soft Start
No

Soft Start

Feature that controls the starting speed of the tool when it is activated, so that it does not start abruptly at maximum torque.
Keyless Guard Adjustment
No
With Brake
No
Keyless Disc Change
No

Accessories

Carrying Case
Without
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

77,00 €
14,00 €   shipping cost