Motorcycle Mirrors

Lampa Motorcycle Adapter 1pcs Black Code: L9053.8

Spacer made of aluminum, of Italian origin from the company Lampa. Ideal product to extend your motorcycle mirror to suit your needs.

  • Length: 40 mm
  • Height provided after installation: 27 mm
  • Thread: M10...

Spacer made of aluminum, of Italian origin from the company Lampa. Ideal product to extend your motorcycle mirror to suit your needs.

  • Length: 40 mm
  • Height provided after installation: 27 mm
  • Thread: M10 right-hand
  • Packaging of 1 piece
See full description

Description

Description

Spacer made of aluminum, of Italian origin from the company Lampa. Ideal product to extend your motorcycle mirror to suit your needs.

  • Length: 40 mm
  • Height provided after installation: 27 mm
  • Thread: M10 right-hand
  • Packaging of 1 piece

Manufacturer

See full description

Specifications

Specifications

Product Number
L9053.8
Type
Adapters
Colour
Black
Placement
Right
Pieces
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (10)

Reviews

  1. 5
  2. 4
  3. 3 stars
    0
  4. 1
  5. 1 star
    0
Review this product
  • Vibration resistance
  • Field of visibility
  • Is it easy to install?
  • Value for money

Reviews by our members

  • stefos.pan

    Verified purchase

    I got 2 for the jet x 125. You need 2 right-handed ones. The length of the screw is longer than what fits the jet x 125. You can wrap it with aluminum foil to tighten it well if you don't have a nut!

    Translated from Greek ·
    • Is it easy to install?
    • Vibration resistance
    • Field of visibility
    • Value for money
    Did you find this review helpful?
  • Dr1ftGR

    Verified purchase

    I bought 2 to see better on my Sym Jet X 125, besides the fact that the fastening screw is bigger (you can make it fit with a washer as a friend suggested), the thread to fit the mirror on top doesn't match the mirrors I wear, so I just threw them in a drawer.
    Edit 26/10/23
    I finally installed them, it was the mirror thread's fault, it was probably damaged when they were put on the scooter and it had a little play at first, now they provide good visibility, they require a tight fit and don't move, overall satisfied but I think they are overpriced for what they are, hence the 4 stars.

    Translated from Greek ·
    • Is it easy to install?
    • Vibration resistance
    • Field of visibility
    • Value for money
    Did you find this review helpful?
  • sofjim65

    Verified purchase

    The visibility is greatly improved. The only negative thing is that the screw that comes with it is too long, resulting in it being screwed but not tightened. Maybe my bike has a "shallow" thread - I don't know. It needed a modification to be installed (an additional washer was added, see photo), but everything is fine (the height also increased, so it's better).

    Translated from Greek ·
    • Vibration resistance
    • Field of visibility
    • Value for money
    • It's relatively difficult to install
    Did you find this review helpful?
  • nmagi

    Verified purchase

    They provide better width to the mirrors, for large backs :D and if you wear many clothes they are necessary. A little high price, they are aluminum.

    Translated from Greek ·
    • Is it easy to install?
    • Vibration resistance
    • Field of visibility
    • Value for money
    Did you find this review helpful?
  • Verified purchase

  • Verified purchase

  • Verified purchase

    • Is it easy to install?
    • Vibration resistance
    • Field of visibility
    • Value for money
    • Is it easy to install?
    • Vibration resistance
    • Field of visibility
    • Value for money
  • I got 2 for the jet x 125. You need 2 right-handed ones. The length of the screw is longer than what fits the jet x 125. You can wrap it with aluminum foil to tighten it well if you don't have a nut!

    Translated from Greek ·
    0
  • I bought 2 to see better on my Sym Jet X 125, besides the fact that the fastening screw is bigger (you can make it fit with a washer as a friend suggested), the thread to fit the mirror on top doesn't match the mirrors I wear, so I just threw them in a drawer.
    Edit 26/10/23
    I finally installed them, it was the mirror thread's fault, it was probably damaged when they were put on the scooter and it had a little play at first, now they provide good visibility, they require a tight fit and don't move, overall satisfied but I think they are overpriced for what they are, hence the 4 stars.

    Translated from Greek ·
    0
  • The visibility is greatly improved. The only negative thing is that the screw that comes with it is too long, resulting in it being screwed but not tightened. Maybe my bike has a "shallow" thread - I don't know. It needed a modification to be installed (an additional washer was added, see photo), but everything is fine (the height also increased, so it's better).

    Translated from Greek ·
    0
  • They provide better width to the mirrors, for large backs :D and if you wear many clothes they are necessary. A little high price, they are aluminum.

    Translated from Greek ·
    0
  • 0
  • See all

Description & Specifications

Spacer made of aluminum, of Italian origin from the company Lampa. Ideal product to extend your motorcycle mirror to suit your needs.

  • Length: 40 mm
  • Height provided after installation: 27 mm
  • Thread: M10 right-hand
  • Packaging of 1 piece

Manufacturer

Product Number
L9053.8
Type
Adapters
Colour
Black
Placement
Right
Pieces
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (10)

  1. 5
  2. 4
  3. 3 stars
    0
  4. 1
  5. 1 star
    0
Review this product
  • Vibration resistance
  • Field of visibility
  • Is it easy to install?
  • Value for money

Reviews by our members

  • stefos.pan

    Verified purchase

    I got 2 for the jet x 125. You need 2 right-handed ones. The length of the screw is longer than what fits the jet x 125. You can wrap it with aluminum foil to tighten it well if you don't have a nut!

    Translated from Greek ·
    • Is it easy to install?
    • Vibration resistance
    • Field of visibility
    • Value for money
    Did you find this review helpful?
  • Dr1ftGR

    Verified purchase

    I bought 2 to see better on my Sym Jet X 125, besides the fact that the fastening screw is bigger (you can make it fit with a washer as a friend suggested), the thread to fit the mirror on top doesn't match the mirrors I wear, so I just threw them in a drawer.
    Edit 26/10/23
    I finally installed them, it was the mirror thread's fault, it was probably damaged when they were put on the scooter and it had a little play at first, now they provide good visibility, they require a tight fit and don't move, overall satisfied but I think they are overpriced for what they are, hence the 4 stars.

    Translated from Greek ·
    • Is it easy to install?
    • Vibration resistance
    • Field of visibility
    • Value for money
    Did you find this review helpful?
  • sofjim65

    Verified purchase

    The visibility is greatly improved. The only negative thing is that the screw that comes with it is too long, resulting in it being screwed but not tightened. Maybe my bike has a "shallow" thread - I don't know. It needed a modification to be installed (an additional washer was added, see photo), but everything is fine (the height also increased, so it's better).

    Translated from Greek ·
    • Vibration resistance
    • Field of visibility
    • Value for money
    • It's relatively difficult to install
    Did you find this review helpful?
  • nmagi

    Verified purchase

    They provide better width to the mirrors, for large backs :D and if you wear many clothes they are necessary. A little high price, they are aluminum.

    Translated from Greek ·
    • Is it easy to install?
    • Vibration resistance
    • Field of visibility
    • Value for money
    Did you find this review helpful?
  • Verified purchase

  • Verified purchase

  • Verified purchase

    • Is it easy to install?
    • Vibration resistance
    • Field of visibility
    • Value for money
    • Is it easy to install?
    • Vibration resistance
    • Field of visibility
    • Value for money
  • I got 2 for the jet x 125. You need 2 right-handed ones. The length of the screw is longer than what fits the jet x 125. You can wrap it with aluminum foil to tighten it well if you don't have a nut!

    Translated from Greek ·
    0
  • I bought 2 to see better on my Sym Jet X 125, besides the fact that the fastening screw is bigger (you can make it fit with a washer as a friend suggested), the thread to fit the mirror on top doesn't match the mirrors I wear, so I just threw them in a drawer.
    Edit 26/10/23
    I finally installed them, it was the mirror thread's fault, it was probably damaged when they were put on the scooter and it had a little play at first, now they provide good visibility, they require a tight fit and don't move, overall satisfied but I think they are overpriced for what they are, hence the 4 stars.

    Translated from Greek ·
    0
  • The visibility is greatly improved. The only negative thing is that the screw that comes with it is too long, resulting in it being screwed but not tightened. Maybe my bike has a "shallow" thread - I don't know. It needed a modification to be installed (an additional washer was added, see photo), but everything is fine (the height also increased, so it's better).

    Translated from Greek ·
    0
  • They provide better width to the mirrors, for large backs :D and if you wear many clothes they are necessary. A little high price, they are aluminum.

    Translated from Greek ·
    0
  • 0
  • See all
11,34 €
14,00 €   shipping cost