Skroutz.mt

Einhell TC-RH 620 4F Ν Impact Demolition Hammer Electric 620W with Chuck SDS Plus 4257990
Rotary Hammers

Einhell TC-RH 620 4F Ν Impact Demolition Hammer Electric 620W with Chuck SDS Plus 4257990

Power supply: 230-240 V | 50 Hz

Power: 620 W

No-load speed: 1250 min-1

Impact rate: 5200 min-1

Impact energy: 2.2 J

Tool holder: SDS-plus

Drilling capacity in concrete: 20 mm

  • 4 functions:...

Power supply: 230-240 V | 50 Hz

Power: 620 W

No-load speed: 1250 min-1

Impact rate: 5200 min-1

Impact energy: 2.2 J

Tool holder: SDS-plus

Drilling capacity in concrete: 20 mm

  • 4 functions: Drilling/hammering/chiseling with and without lock
  • Single-position switch for all functions
  • The new model - performance combined with compact design
  • Continuous operation...
See full description See full description
  • Item Excavator

  • Impact Energy

    The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

    2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.

    2.2

    For casual amateur use, 2 to 4 Joules are considered sufficient.

  • Power

    Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

    2. Impact Energy is another characteristic that shows the "power" of the tool.

    620

    Indicatively, 500 - 600 Watts are sufficient for simple household use, with more Watts required for harder surfaces.

  • Socket

    SDS - SDS Plus (TE-C)

    SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.

  • Speed Setting

    1

    Ability to control the rotation speed, either through the trigger or via a speed selector.

  • Maximum Number of Impacts

    The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

    2.

    Note that the Impact Energy is also important for performance, indicating the force of each strike.
  • See all
74 99 €
Delivery by Thu, 09 Jul
14,00 €   shipping cost
Sent from Greece
From Tripanaki 4.8 (62)
4.8 (62 reviews)
Greece
1 piece
See Power Tools on the page of Tripanaki
Review the product
Product report

Description

Description

Power supply: 230-240 V | 50 Hz

Power: 620 W

No-load speed: 1250 min-1

Impact rate: 5200 min-1

Impact energy: 2.2 J

Tool holder: SDS-plus

Drilling capacity in concrete: 20 mm

  • 4 functions: Drilling/hammering/chiseling with and without lock
  • Single-position switch for all functions
  • The new model - performance combined with compact design
  • Continuous operation lock for comfortable work
  • Low weight for versatile use, even in high places
  • Pneumatic impact mechanism for very good propulsion
  • Durable SDS-plus chuck with semi-automatic function
  • Electronic speed control for specific materials and applications
  • Ergonomic and soft grip
  • Infinitely adjustable drilling depth from solid metal
  • Supplied in E-Box Basic carrying and storage case

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Power Source
Electric
Type
Excavator

Battery Specifications

Lithium
No

Current Specifications

Power
620 W

Power: 620

Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

2. Impact Energy is another characteristic that shows the "power" of the tool.


Indicatively, 500 - 600 Watts are sufficient for simple household use, with more Watts required for harder surfaces.

Features

Maximum Motor Speed
1250 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
2.2 Joule

Impact Energy: 2.2

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
5200 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
No
Pneumatic
Yes

Pneumatic


With a pneumatic impact mechanism, which relies on air or pressure and makes the tool more efficient in demanding applications.
Speed Adjustable
Yes

Speed Adjustable


Ability to control the rotation speed, either through the trigger or via a speed selector.
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Carrying Case
Case
Handle included
Yes
Integrated Light
No
Guide
Yes
Net Weight
2800 gr

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Power supply: 230-240 V | 50 Hz

Power: 620 W

No-load speed: 1250 min-1

Impact rate: 5200 min-1

Impact energy: 2.2 J

Tool holder: SDS-plus

Drilling capacity in concrete: 20 mm

  • 4 functions: Drilling/hammering/chiseling with and without lock
  • Single-position switch for all functions
  • The new model - performance combined with compact design
  • Continuous operation lock for comfortable work
  • Low weight for versatile use, even in high places
  • Pneumatic impact mechanism for very good propulsion
  • Durable SDS-plus chuck with semi-automatic function
  • Electronic speed control for specific materials and applications
  • Ergonomic and soft grip
  • Infinitely adjustable drilling depth from solid metal
  • Supplied in E-Box Basic carrying and storage case

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Power Source
Electric
Type
Excavator

Battery Specifications

Lithium
No

Current Specifications

Power
620 W

Power: 620

Power indicates the strength of the machine. Usually, the greater the Power of a machine, the easier it can penetrate a surface.

2. Impact Energy is another characteristic that shows the "power" of the tool.


Indicatively, 500 - 600 Watts are sufficient for simple household use, with more Watts required for harder surfaces.

Features

Maximum Motor Speed
1250 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
2.2 Joule

Impact Energy: 2.2

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
5200 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
No
Pneumatic
Yes

Pneumatic


With a pneumatic impact mechanism, which relies on air or pressure and makes the tool more efficient in demanding applications.
Speed Adjustable
Yes

Speed Adjustable


Ability to control the rotation speed, either through the trigger or via a speed selector.
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Carrying Case
Case
Handle included
Yes
Integrated Light
No
Guide
Yes
Net Weight
2800 gr

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

74,99 €
14,00 €   shipping cost