The Chromodomi Monoblock elastomeric acrylic waterproofing coating is suitable for application on rooftops and walls, as well as on bituminous surfaces and tar. It is a brush-on liquid applied in two coats, with the second coat applied crosswise once the first has dried and is dry enough to walk on.
Before application, clean the surface of dust, grease, oil, loose old paint, rust, and traces of mould and moisture, then prime it with Life Dur white-spirit-based primer. Allow the first coat to dry for 24 hours. The product reaches its full mechanical strength in 20–30 days. Apply with a brush or roller at temperatures between 6 °C and 40 °C and relative humidity of up to 80%. Clean tools immediately with warm water and soap. Do not pour wash water into groundwater.
- Type: Elastomeric acrylic waterproofing coating
- Form: Brush-on liquid
- Capacity: 3 L
- Colour: White
- Application surfaces: Rooftop, wall
- Surface materials: Bituminous material, tar
- Application tools: Brush, roller
- Number of coats: 2
- First coat drying time: 24 hours
- Time to reach mechanical strength: 20–30 days
- Application temperature: 6 °C to 40 °C
- Relative humidity during application: Up to 80%
Product Details
- Type
- Lubricating Liquid
- Colour
- White
- Application Surface
- Terrace, Wall
- Application Surface Material
- Asphalt Material, Tar
Additional Specifications
- Polyurethane
- No
- Elastomer
- Yes
- Acrylic
- Yes
- Bituminous
- No
- Cementitious
- No
- 2-Component
- No
Packaging
- Capacity
- 3 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.