Chromodomi Step Latex emulsion paint is intended for indoor use and can be applied to clean surfaces with a roller, brush or spray gun. It offers excellent coverage and whiteness, creates a velvety finish and is resistant to frequent washing. It contains no ammonia and is certified in accordance with EN 71-3.
Before application, remove dust, grease, oils, flaking old paint, rust, mould and moisture from the surface. On new or porous surfaces, apply a suitable primer first. Stir the paint thoroughly and apply in 2 coats, allowing 1–2 hours between coats. It achieves full mechanical resistance after 20–30 days. Do not apply at temperatures below 6 °C or above 40 °C, or when relative humidity exceeds 80%. Drain the tools thoroughly, then clean them immediately with warm water and soap. Do not pour wash water into groundwater.
- Use: Interior
- Quantity: 9 L
- Colour: White
- Coverage: Excellent
- Finish: Velvety
- Resistance: Resistant to frequent washing
- Ammonia: None
- Certification: EN 71-3
- Number of coats: 2
- Time between coats: 1–2 hours
- Time to full mechanical resistance: 20–30 days
- Application temperature: 6 °C to 40 °C
- Maximum relative humidity for application: 80%
- Application tools: Roller, brush or spray gun
- Usage
- Interior
- Quantity
- 9 lt
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.