Skroutz.mt

Wurth 150 E Twin Master Electric Eccentric Sander 150mm Electric 350W with Speed Control and with Suction System 07021290
Sanders

Wurth 150 E Twin Master Electric Eccentric Sander 150mm Electric 350W with Speed Control and with Suction System 07021290

With two lift levels for coarse and fine sanding, featuring a sanding plate with 6 holes for sanding discs 150 mm.

  • 2 stroke settings in one machine.
  • Coarse sanding with a stroke of 6.2 mm.
  • Fine...

With two lift levels for coarse and fine sanding, featuring a sanding plate with 6 holes for sanding discs 150 mm.

  • 2 stroke settings in one machine.
  • Coarse sanding with a stroke of 6.2 mm.
  • Fine sanding with a stroke of 2.8 mm.
  • High removal rate.
  • Simultaneous rotation and oscillation movement.
  • Built-in dust extraction system.
  • Can also be used without the...
See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    2.8

    General sanding, finishing of wood or paint.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Weight (Net) 2200 gr
  • See all
Review the product
Product report

Description

Description

With two lift levels for coarse and fine sanding, featuring a sanding plate with 6 holes for sanding discs ∅ 150 mm.

  • 2 stroke settings in one machine.
  • Coarse sanding with a stroke of 6.2 mm.
  • Fine sanding with a stroke of 2.8 mm.
  • High removal rate.
  • Simultaneous rotation and oscillation movement.
  • Built-in dust extraction system.
  • Can also be used without the extraction function if needed.
  • Adjustment wheel to modify the number of rotations and oscillations.
  • Capability to process sensitive materials such as veneers or thin layers of paint effortlessly.

Nominal voltage 230 V/AC, Frequency 50 Hz, Protection class II/protective insulation, Power input 350 W, Min./Max. no-load speed 4200-9200 U/min (rpm), Min./Max. no-load rotation rate 8400-18400 1/min, Diameter of sanding plate 150 mm, Oscillation diameter, 1st speed/2nd speed 2.8 / 6.2 mm, Machine weight 2.2 kg, Cable length 4 m.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
2.8 mm

Eccentricity: 2.8

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Net Weight
2200 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
350 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
9200 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
-

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

With two lift levels for coarse and fine sanding, featuring a sanding plate with 6 holes for sanding discs ∅ 150 mm.

  • 2 stroke settings in one machine.
  • Coarse sanding with a stroke of 6.2 mm.
  • Fine sanding with a stroke of 2.8 mm.
  • High removal rate.
  • Simultaneous rotation and oscillation movement.
  • Built-in dust extraction system.
  • Can also be used without the extraction function if needed.
  • Adjustment wheel to modify the number of rotations and oscillations.
  • Capability to process sensitive materials such as veneers or thin layers of paint effortlessly.

Nominal voltage 230 V/AC, Frequency 50 Hz, Protection class II/protective insulation, Power input 350 W, Min./Max. no-load speed 4200-9200 U/min (rpm), Min./Max. no-load rotation rate 8400-18400 1/min, Diameter of sanding plate 150 mm, Oscillation diameter, 1st speed/2nd speed 2.8 / 6.2 mm, Machine weight 2.2 kg, Cable length 4 m.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Eccentricity
2.8 mm

Eccentricity: 2.8

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Net Weight
2200 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
350 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
9200 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
-

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

477,65 €
14,00 €   shipping cost