Skroutz.mt

Grundfos Unilift CC 7A1 Single-phase Water Pump 0.5hp 96280968
Submersible Water Pumps

Grundfos Unilift CC 7A1 Single-phase Water Pump 0.5hp 96280968

SUBMERSIBLE GROUNDWATER PUMPS

The Grundfos UNILIFT CC pumps are single-stage submersible pumps designed for pumping clean, non-corrosive water and domestic wastewater. They can pump down to a water...

SUBMERSIBLE GROUNDWATER PUMPS

The Grundfos UNILIFT CC pumps are single-stage submersible pumps designed for pumping clean, non-corrosive water and domestic wastewater. They can pump down to a water level of 3mm. They feature one outlet at the top and a side outlet, making them easily adaptable to existing piping.

Suitable for:

  • Commercial building wastewater...
See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

SUBMERSIBLE GROUNDWATER PUMPS

The Grundfos UNILIFT CC pumps are single-stage submersible pumps designed for pumping clean, non-corrosive water and domestic wastewater. They can pump down to a water level of 3mm. They feature one outlet at the top and a side outlet, making them easily adaptable to existing piping.

Suitable for:

  • Commercial building wastewater
  • Domestic wastewater
  • Industrial wastewater

Product name: Unilift CC7 - A1

Product number: 96280968

TECHNICAL SPECIFICATIONS:

  • Nominal flow: 1.4 l/s
  • Maximum flow: 2.78 l/s
  • Nominal head: 3.95 m
  • Maximum head: 7 m
  • Maximum particle: 10 mm
  • Approvals: CE, LGA, VDE, GS, EMV, GOST
  • Nominal drive speed: 2850 rpm
  • Pump casing: Polypropylene
  • Impeller: PPOm 20 GF
  • Shaft: Stainless steel EN 1.4301 AISI 304
  • Motor: Stainless steel EN 1.4301 AISI 304

OPERATION:

Connection type:

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.5 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
375 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
10 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
3 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

SUBMERSIBLE GROUNDWATER PUMPS

The Grundfos UNILIFT CC pumps are single-stage submersible pumps designed for pumping clean, non-corrosive water and domestic wastewater. They can pump down to a water level of 3mm. They feature one outlet at the top and a side outlet, making them easily adaptable to existing piping.

Suitable for:

  • Commercial building wastewater
  • Domestic wastewater
  • Industrial wastewater

Product name: Unilift CC7 - A1

Product number: 96280968

TECHNICAL SPECIFICATIONS:

  • Nominal flow: 1.4 l/s
  • Maximum flow: 2.78 l/s
  • Nominal head: 3.95 m
  • Maximum head: 7 m
  • Maximum particle: 10 mm
  • Approvals: CE, LGA, VDE, GS, EMV, GOST
  • Nominal drive speed: 2850 rpm
  • Pump casing: Polypropylene
  • Impeller: PPOm 20 GF
  • Shaft: Stainless steel EN 1.4301 AISI 304
  • Motor: Stainless steel EN 1.4301 AISI 304

OPERATION:

Connection type:

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.5 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
375 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
10 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
3 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.