Skroutz.mt

Steg Car Speaker Set SQ100C Separate with 80W RMS (Woofer)
Car Speakers

Steg Car Speaker Set SQ100C Separate with 80W RMS (Woofer) Code: H-GT-SQ100C

This high-quality 10cm component set transforms music listening into an entirely new experience.

In this set, the following stand out:

  • Accurate reproduction
  • Special materials
  • Build quality

Discover...

This high-quality 10cm component set transforms music listening into an entirely new experience.

In this set, the following stand out:

  • Accurate reproduction
  • Special materials
  • Build quality

Discover the SQ100C by STEG.

Specifications:

  • Woofer Nominal Impedance: 4 ohm
  • Power Handling: 40W
  • Max. Transient Handling: 80W
  • Sensitivity (2.83V/1M): 88dB
  • Frequency...
See full description See full description

  • RMS Power

    The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.

  • Resistance

     The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

  • Maximum Power

    The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

This high-quality 10cm component set transforms music listening into an entirely new experience.

In this set, the following stand out:

  • Accurate reproduction
  • Special materials
  • Build quality

Discover the SQ100C by STEG.

Specifications:

  • Woofer Nominal Impedance: 4 ohm
  • Power Handling: 40W
  • Max. Transient Handling: 80W
  • Sensitivity (2.83V/1M): 88dB
  • Frequency Response: 75-20000Hz
  • Voice Coil Diameter Woofer/Tweeter: 25mm (1")
  • Voice Coil Wire: Copper
  • Magnet System Woofer: High grade ferrite magnet
  • Magnet System Tweeter: Neodymium
  • Mounting Depth: 53mm Without grille
  • Tweeter: 25mm fabric tweeter, fs=1270Hz, 12dB/oct.
  • Cable crossover with level reduction with console and installation housing
  • Dimensions without cabinet: Diameter: 46.5mm, Installation depth: 7mm, Total height with grille: 20.5mm
  • Dimensions built-in pot: Outer diameter: 58mm, Installation diameter: 49mm, Installation depth: 16mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
H-GT-SQ100C

Dimensions

Type
Woofer

Type

Woofer

Speakers designed primarily to reproduce low frequencies (bass). They are usually chosen as part of a setup that includes separate tweeter and midrange speakers. For more bass, it is recommended to also install a subwoofer.
Shape
Round

Technical Specifications

Peak Power
400 W

Peak Power

The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
Power (RMS)
80 W

Power (RMS)

The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.
Nominal Impendance
4 ohm

Nominal Impendance

 The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

This high-quality 10cm component set transforms music listening into an entirely new experience.

In this set, the following stand out:

  • Accurate reproduction
  • Special materials
  • Build quality

Discover the SQ100C by STEG.

Specifications:

  • Woofer Nominal Impedance: 4 ohm
  • Power Handling: 40W
  • Max. Transient Handling: 80W
  • Sensitivity (2.83V/1M): 88dB
  • Frequency Response: 75-20000Hz
  • Voice Coil Diameter Woofer/Tweeter: 25mm (1")
  • Voice Coil Wire: Copper
  • Magnet System Woofer: High grade ferrite magnet
  • Magnet System Tweeter: Neodymium
  • Mounting Depth: 53mm Without grille
  • Tweeter: 25mm fabric tweeter, fs=1270Hz, 12dB/oct.
  • Cable crossover with level reduction with console and installation housing
  • Dimensions without cabinet: Diameter: 46.5mm, Installation depth: 7mm, Total height with grille: 20.5mm
  • Dimensions built-in pot: Outer diameter: 58mm, Installation diameter: 49mm, Installation depth: 16mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
H-GT-SQ100C

Dimensions

Type
Woofer

Type

Woofer

Speakers designed primarily to reproduce low frequencies (bass). They are usually chosen as part of a setup that includes separate tweeter and midrange speakers. For more bass, it is recommended to also install a subwoofer.
Shape
Round

Technical Specifications

Peak Power
400 W

Peak Power

The maximum power indicates the highest amount of energy a speaker can handle without being damaged. The higher this value, the louder the sound can be. At the same time, the power provided by the amplifier or audio system should be matched to the speaker's limits to ensure safe operation.
Power (RMS)
80 W

Power (RMS)

The actual power at which the speakers can operate for an extended period of time. Usually, the higher this value, the louder and clearer the music sounds.
Nominal Impendance
4 ohm

Nominal Impendance

 The resistance of a speaker, measured in Ohms, indicates how easily electric current flows through it and affects how much power it can receive from the amplifier, contributing to the safe and proper operation of the audio system.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.