Skroutz.mt

125.4 Power Amplifier Commercial 4 Channels 125W/100V
Commercial Amplifiers

125.4 Power Amplifier Commercial 4 Channels 125W/100V

The Show 125.4 installation power amplifier delivers 125 W per channel and operates in Class H. It supports 4 Ω, 70 V, and 100 V outputs, while channels 1–2 and 3–4 can operate in DUAL or MONO mode.

...

The Show 125.4 installation power amplifier delivers 125 W per channel and operates in Class H. It supports 4 Ω, 70 V, and 100 V outputs, while channels 1–2 and 3–4 can operate in DUAL or MONO mode.

The inputs are balanced XLR, and the outputs connect via screw terminals. Protection circuits cover overvoltage, short circuits, and overheating.

  • Type:...
See full description See full description
599 00 €
Delivery by Thu, 12 Nov
29,00 €   shipping cost
Sent from Greece
From Technosound 5.0 (45)
5.0 (45 reviews)
Greece
5+ pieces
See Commercial PA & Audio Installation Equipment on the page of Technosound

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Show 125.4 installation power amplifier delivers 125 W per channel and operates in Class H. It supports 4 Ω, 70 V, and 100 V outputs, while channels 1–2 and 3–4 can operate in DUAL or MONO mode.

The inputs are balanced XLR, and the outputs connect via screw terminals. Protection circuits cover overvoltage, short circuits, and overheating.

  • Type: Installation power amplifier
  • Channels: 4
  • Power per channel: 125 W
  • Class technology: H
  • Output: 4 Ω, 70 V, 100 V
  • Channel mode: DUAL or MONO per channel pair
  • Inputs: Balanced XLR
  • Outputs: Screw terminals
  • Signal-to-noise ratio: Above 95 dB
  • Frequency response: 20 Hz–20 kHz with the L/H filter disabled, 200 Hz–10 kHz with the L/H filter enabled
  • Power supply: 115–230 V, 50/60 Hz
  • Protection circuits: Overvoltage, short circuits, and overheating
  • Width: 483 mm
  • Height: 88.5 mm
  • Depth: 353 mm
  • Weight: 9.2 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Amplifier Type
Commercial Amplifier
Type
Power Amplifier
Channels
4
Power (100V)
125 W
Class
H

Additional Specifications

Radio
No
Cooling system
No

Connectivity

RCA
No
XLR
Yes
Mini Jack (3.5mm)
No
Jack (6.3mm)
No
USB
No
Ethernet
No
Bluetooth
No
Mic In
No

Dimensions

Width
483 mm
Height
88.5 mm
Length
353 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Show 125.4 installation power amplifier delivers 125 W per channel and operates in Class H. It supports 4 Ω, 70 V, and 100 V outputs, while channels 1–2 and 3–4 can operate in DUAL or MONO mode.

The inputs are balanced XLR, and the outputs connect via screw terminals. Protection circuits cover overvoltage, short circuits, and overheating.

  • Type: Installation power amplifier
  • Channels: 4
  • Power per channel: 125 W
  • Class technology: H
  • Output: 4 Ω, 70 V, 100 V
  • Channel mode: DUAL or MONO per channel pair
  • Inputs: Balanced XLR
  • Outputs: Screw terminals
  • Signal-to-noise ratio: Above 95 dB
  • Frequency response: 20 Hz–20 kHz with the L/H filter disabled, 200 Hz–10 kHz with the L/H filter enabled
  • Power supply: 115–230 V, 50/60 Hz
  • Protection circuits: Overvoltage, short circuits, and overheating
  • Width: 483 mm
  • Height: 88.5 mm
  • Depth: 353 mm
  • Weight: 9.2 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Amplifier Type
Commercial Amplifier
Type
Power Amplifier
Channels
4
Power (100V)
125 W
Class
H

Additional Specifications

Radio
No
Cooling system
No

Connectivity

RCA
No
XLR
Yes
Mini Jack (3.5mm)
No
Jack (6.3mm)
No
USB
No
Ethernet
No
Bluetooth
No
Mic In
No

Dimensions

Width
483 mm
Height
88.5 mm
Length
353 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

599,00 €
29,00 €   shipping cost

Show