The Citronic H1600 PA power amplifier features two channels and a hybrid Class-H architecture, with a digitally controlled and monitored power section. It delivers 450 W per channel at 8 Ω and 650 W per channel at 4 Ω, and is stable down to 2 Ω. It can be operated in Stereo, Parallel or Bridge mode.

The replaceable 120 Hz low-pass filter allows it to be used with a subwoofer. The backlit LCD displays the supply voltage, internal temperature and output level. The speaker outputs connect via one or two Speakon cables.

• Type: PA power amplifier
• Channels: 2
• Class technology: Hybrid Class-H
• Power at 8 Ω: 450 W per channel
• Power at 4 Ω: 650 W per channel
• Power at 2 Ω: 800 W per channel in a 40 ms burst with a 1 kHz sine wave
• Bridged power at 8 Ω: 1200 W
• Bridged power at 4 Ω: 1600 W in a 40 ms burst with a 1 kHz sine wave
• Modes: Stereo, Parallel, Bridge
• Low-pass filter: Replaceable, 120 Hz
• Frequency response: 20 Hz–20 kHz ±0.5 dB
• THD+N distortion: 0.2%
• Signal-to-noise ratio: -95 dB
• Damping factor: >700
• Input sensitivity: 1.0 V, 1.4 V or 2.0 V, selectable
• Input impedance: 20 kΩ balanced, 10 kΩ unbalanced
• Protections: Short circuit, open circuit, thermal, RF, DC fault, power-on/off muting and active inrush current limiting
• Speaker output connection: Via one or two Speakon cables
• Width: 483 mm
• Height: 44 mm
• Depth: 361 mm
• Weight: 6.8 kg
• Power supply: 200–240 V AC, 50 Hz