Commercial Amplifiers

UM90 Integrated Commercial Amplifier 90W/100V Equipped with USB/FM/Bluetooth Black

The Adastra UM90 installation amplifier combines 100 V audio amplification with built-in USB playback, FM radio and a wireless Bluetooth receiver. Class D architecture and transformer output support...

The Adastra UM90 installation amplifier combines 100 V audio amplification with built-in USB playback, FM radio and a wireless Bluetooth receiver. Class D architecture and transformer output support operation on a 100 V line or with an 8 Ohm speaker load. The microphone, line and AUX inputs, as well as the USB, FM and Bluetooth sections, are controlled by...

See full description See full description
279 68 €
Delivery by Thu, 26 Nov
29,00 €   shipping cost
Sent from Greece
From Technosound 5.0 (47)

Learn more about invoicing

Description

Description

The Adastra UM90 installation amplifier combines 100 V audio amplification with built-in USB playback, FM radio and a wireless Bluetooth receiver. Class D architecture and transformer output support operation on a 100 V line or with an 8 Ohm speaker load. The microphone, line and AUX inputs, as well as the USB, FM and Bluetooth sections, are controlled by the front-panel volume controls and master volume.

The mono line output and speaker outputs connect via screw terminals on the rear panel. There is also an alarm output with foghorn, siren and alert generators. Hardware is included for mounting two units side by side in a 1U 19" rack.

  • Type: Integrated installation amplifier
  • Output power at 100 V: 90 W
  • RMS power at 24 V DC: 80 W
  • Amplification technology: Class D with transformer output
  • Audio sources: USB, FM and Bluetooth
  • Inputs: 1 x 6.3 mm microphone, 1 x 2 RCA line and 1 x 3.5 mm AUX
  • Line output: 2 x RCA, mono
  • Speaker outputs: 100 V, 8 Ohms and common connection, with screw terminals
  • Alarm output: Foghorn, siren and alert generators
  • Power supply: 170–264 V AC, 50 Hz via IEC or 24 V DC
  • Mute: 24 V relay contacts
  • Harmonic distortion: < 0.4% at 1 kHz
  • Input impedance: 1 kOhm for microphone and line
  • Input sensitivity: -10 dB for line and -45 dB for microphone
  • Signal-to-noise ratio: 80 dB for line and 75 dB for microphone
  • Frequency response: 100 Hz–18 kHz
  • Dimensions: 330 x 210 x 44 mm
  • Weight: 3.02 kg

Manufacturer

See full description

Specifications

Specifications

Technical Specifications

Amplifier Type
Commercial Amplifier
Type
Integrated
Power (100V)
90 W
Class
D

Additional Specifications

Radio
Yes
Cooling system
No

Connectivity

RCA
Yes
XLR
No
Mini Jack (3.5mm)
Yes
Jack (6.3mm)
No
USB
Yes
Ethernet
No
Bluetooth
Yes
Mic In
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Adastra UM90 installation amplifier combines 100 V audio amplification with built-in USB playback, FM radio and a wireless Bluetooth receiver. Class D architecture and transformer output support operation on a 100 V line or with an 8 Ohm speaker load. The microphone, line and AUX inputs, as well as the USB, FM and Bluetooth sections, are controlled by the front-panel volume controls and master volume.

The mono line output and speaker outputs connect via screw terminals on the rear panel. There is also an alarm output with foghorn, siren and alert generators. Hardware is included for mounting two units side by side in a 1U 19" rack.

  • Type: Integrated installation amplifier
  • Output power at 100 V: 90 W
  • RMS power at 24 V DC: 80 W
  • Amplification technology: Class D with transformer output
  • Audio sources: USB, FM and Bluetooth
  • Inputs: 1 x 6.3 mm microphone, 1 x 2 RCA line and 1 x 3.5 mm AUX
  • Line output: 2 x RCA, mono
  • Speaker outputs: 100 V, 8 Ohms and common connection, with screw terminals
  • Alarm output: Foghorn, siren and alert generators
  • Power supply: 170–264 V AC, 50 Hz via IEC or 24 V DC
  • Mute: 24 V relay contacts
  • Harmonic distortion: < 0.4% at 1 kHz
  • Input impedance: 1 kOhm for microphone and line
  • Input sensitivity: -10 dB for line and -45 dB for microphone
  • Signal-to-noise ratio: 80 dB for line and 75 dB for microphone
  • Frequency response: 100 Hz–18 kHz
  • Dimensions: 330 x 210 x 44 mm
  • Weight: 3.02 kg

Manufacturer

Technical Specifications

Amplifier Type
Commercial Amplifier
Type
Integrated
Power (100V)
90 W
Class
D

Additional Specifications

Radio
Yes
Cooling system
No

Connectivity

RCA
Yes
XLR
No
Mini Jack (3.5mm)
Yes
Jack (6.3mm)
No
USB
Yes
Ethernet
No
Bluetooth
Yes
Mic In
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

279,68 €
29,00 €   shipping cost