Skroutz.mt

TotoLink CP300 Access Point Wi‑Fi 4 Single Band (2.4GHz) for Outdoor Placement
Access Points

TotoLink CP300 Access Point Wi‑Fi 4 Single Band (2.4GHz) for Outdoor Placement

The CP300 is a WISP CPE solution specifically designed for long-distance wireless transmissions. With two internal 12dBi high-gain antennas and advanced radio architecture, it offers extensive signal...

The CP300 is a WISP CPE solution specifically designed for long-distance wireless transmissions. With two internal 12dBi high-gain antennas and advanced radio architecture, it offers extensive signal coverage and stable wireless connection with data speeds up to 300Mbps. It is powered via Passive PoE, making cable deployment more flexible. The external...

See full description See full description

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Single Band (2.4GHz)

    An Access Point that only connects to Single Band (2.4GHz) can cover a greater distance compared to that of 5GHz. It may also suffer from congestion and interference from other wireless networks that transmit in the same frequency band. Additionally, the data transmission speed may be lower compared to networks that support Dual Band or Tri Band, due to the limited frequency options it offers.

  • Wi-Fi Generation

    Wi‑Fi 4

    Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

    For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
  • See all
Review the product
Product report

Description

Description

The CP300 is a WISP CPE solution specifically designed for long-distance wireless transmissions. With two internal 12dBi high-gain antennas and advanced radio architecture, it offers extensive signal coverage and stable wireless connection with data speeds up to 300Mbps. It is powered via Passive PoE, making cable deployment more flexible. The external protection supports its operation in all weather conditions.

Features:

  • Complies with IEEE802.11n/g/b standards in the 2.4G band.
  • RF power up to 500mW.
  • Supports DHCP/Static IP/PPPoE (dual access)/PPTP (dual access)/L2TP (dual access).
  • Two internal 11dBi antennas.
  • 4 LED indicators for signal strength.
  • Waterproof casing (IP65).
  • Supports WEP 64/128 bit and WPA, WPA2, WPA-Mixed encryption.
  • Supports power via Passive PoE.
  • Lightning protection design.
  • Repeater mode for supporting more terminals on the Internet.
  • WDS mode for connection.
  • Simple installation that facilitates basic router settings.
  • Chip: RTL8196E+RTL8192ER.
  • Flash: Default 4MB SPI Nor Flash.
  • SDRAM: Default 32MB SDRAM.
  • Interface: 1 * 100BaseTX (Auto MDI/MDIX) LAN Port (Passive PoE supported).
  • Power: 12V DC /1A (PoE), includes POE injector.
  • Button: 1 * Reset Button.
  • Antenna: 2 * 12dBi internal antennas, sector.
  • LED Indicators: 1 * Power, 1 * LAN, 1 * WLAN, 4 * Signal Strength.

Wireless Characteristics:

  • Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3u, IEEE 802.3.
  • RF Frequency: 2.4~2.4835GHz.
  • Data Speed: 802.11n: up to 300Mbps, 802.11g: up to 54Mbps (dynamic), 802.11b: up to 11Mbps (dynamic).
  • Wireless Security: 64/128-bit WEP, WPA/WPA2, WPA-Mixed.
  • Channel: 1-11 (North America), 1-13 (General Europe), 1-14 (Japan).
  • Modulation Type: DBPSK, DQPSK, CCK and OFDM (BPSK, QPSK, 16-QAM/ 64-QAM).

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Single Band (2.4GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (2.4GHz)
An Access Point that only connects to Single Band (2.4GHz) can cover a greater distance compared to that of 5GHz. It may also suffer from congestion and interference from other wireless networks that transmit in the same frequency band. Additionally, the data transmission speed may be lower compared to networks that support Dual Band or Tri Band, due to the limited frequency options it offers.
Maximum WLAN Speed
300 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n
LAN speed
100 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
12 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Outdoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
Yes

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The CP300 is a WISP CPE solution specifically designed for long-distance wireless transmissions. With two internal 12dBi high-gain antennas and advanced radio architecture, it offers extensive signal coverage and stable wireless connection with data speeds up to 300Mbps. It is powered via Passive PoE, making cable deployment more flexible. The external protection supports its operation in all weather conditions.

Features:

  • Complies with IEEE802.11n/g/b standards in the 2.4G band.
  • RF power up to 500mW.
  • Supports DHCP/Static IP/PPPoE (dual access)/PPTP (dual access)/L2TP (dual access).
  • Two internal 11dBi antennas.
  • 4 LED indicators for signal strength.
  • Waterproof casing (IP65).
  • Supports WEP 64/128 bit and WPA, WPA2, WPA-Mixed encryption.
  • Supports power via Passive PoE.
  • Lightning protection design.
  • Repeater mode for supporting more terminals on the Internet.
  • WDS mode for connection.
  • Simple installation that facilitates basic router settings.
  • Chip: RTL8196E+RTL8192ER.
  • Flash: Default 4MB SPI Nor Flash.
  • SDRAM: Default 32MB SDRAM.
  • Interface: 1 * 100BaseTX (Auto MDI/MDIX) LAN Port (Passive PoE supported).
  • Power: 12V DC /1A (PoE), includes POE injector.
  • Button: 1 * Reset Button.
  • Antenna: 2 * 12dBi internal antennas, sector.
  • LED Indicators: 1 * Power, 1 * LAN, 1 * WLAN, 4 * Signal Strength.

Wireless Characteristics:

  • Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3u, IEEE 802.3.
  • RF Frequency: 2.4~2.4835GHz.
  • Data Speed: 802.11n: up to 300Mbps, 802.11g: up to 54Mbps (dynamic), 802.11b: up to 11Mbps (dynamic).
  • Wireless Security: 64/128-bit WEP, WPA/WPA2, WPA-Mixed.
  • Channel: 1-11 (North America), 1-13 (General Europe), 1-14 (Japan).
  • Modulation Type: DBPSK, DQPSK, CCK and OFDM (BPSK, QPSK, 16-QAM/ 64-QAM).

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Single Band (2.4GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (2.4GHz)
An Access Point that only connects to Single Band (2.4GHz) can cover a greater distance compared to that of 5GHz. It may also suffer from congestion and interference from other wireless networks that transmit in the same frequency band. Additionally, the data transmission speed may be lower compared to networks that support Dual Band or Tri Band, due to the limited frequency options it offers.
Maximum WLAN Speed
300 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n
LAN speed
100 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
12 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Outdoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
Yes

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

29,90 €
14,00 €   shipping cost