The TP-LINK TL-SG1210MPE v1 Switch connects devices through 9 Gigabit Ethernet ports and one Gigabit combo SFP/RJ45 port. Ports 1–8 support PoE+ for transmitting data and power over the same cable, with up to 30 W per port and a total power budget of 123 W. Power management reduces power to lower-priority ports when consumption exceeds the limit.

Configuration is available through a web interface or the Easy Smart Configuration Utility, and Plug and Play connectivity is also supported. The Switch provides network monitoring, traffic prioritization, VLAN and PoE Auto Recovery. It has a metal enclosure and a fanless design.

• Type: Easy Smart Layer 2 Switch
• Ethernet ports: 9 Gigabit 10/100/1000 Mbps RJ45 ports, 8 of which support PoE+
• SFP port: 1 Gigabit combo SFP/RJ45 port
• Network standards: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x, IEEE 802.3z, IEEE 802.1q, IEEE 802.1p
• PoE+ power: Up to 30 W per port, with a total budget of 123 W
• Power management: Automatically detects PoE requirements and reduces power to lower-priority ports if the limit is exceeded
• Switching capacity: 20 Gbps
• Packet forwarding rate: 14.88 Mpps
• MAC address table: 4,000 entries, with automatic learning and aging
• Switching method: Store and Forward
• Layer 2 features: IGMP Snooping V1/V2/V3, Static Link Aggregation, Loop Prevention, PoE Auto Recovery, Port Mirroring, IEEE 802.3x Flow Control and 16 KB Jumbo Frames
• VLAN features: MTU, Port and Tag VLAN, with up to 32 VLANs active simultaneously from 4K VLAN IDs
• Traffic prioritization: QoS, 802.1p/DSCP, 4 priority queues, rate limiting and Storm Control
• Additional features: Auto-Negotiation, Auto-MDI/MDIX, cable diagnostics and isolation mode for ports 1–8
• Extend Mode: Transmits data and PoE power over distances of up to 250 m
• Configuration: Plug and Play, web interface and Easy Smart Configuration Utility
• Priority button: For ports 1–2
• Cabling: 100BASE-TX using Category 5 or 5e UTP up to 100 m, 10BASE-T using Category 3, 4 or 5 UTP up to 100 m, or EIA/TIA-568 100 Ω STP up to 100 m
• Power supply: External adapter with 53.5 V DC / 2.43 A output
• Operating temperature: 0 to 40 °C
• Storage temperature: -40 to 70 °C
• Operating humidity: 10% to 90%, non-condensing
• Storage humidity: 5% to 90%, non-condensing
• Dimensions: 209 × 126 × 26 mm
• Enclosure: Metal, fanless
• Colour: Black
• Use: Home and business environments
• Compatibility: IP cameras, access points, IP phones, computers and printers
• Package contents: Switch, power adapter, installation guide and rubber feet