UHU Power Spray contact adhesive bonds paper, cardboard, leather, felt, foam, many plastics, cloth and textiles to one another, as well as to wood, ceramics and glass. It is also suitable for Styrofoam® and leaves a permanent, transparent bond. The spray produces a smooth, even pattern.
Surfaces must be clean, dry and free from dust or grease. Do not use the product at temperatures below +10 °C. Shake the can before use and spray from a distance of approximately 15–20 cm. Spray each surface separately, leave to dry for approximately 5–20 minutes, then press the surfaces together briefly and firmly. For Styrofoam®, spray both surfaces from a distance of approximately 30 cm and leave to dry for approximately 5–20 minutes before joining.
- Type: Contact adhesive
- Form: Spray
- Quantity: 200 ml
- Colour: Transparent
- Properties: All-purpose, permanent bond, quick application
- Suitable materials: Paper, cardboard, leather, felt, foam, many plastics, cloth, textiles, Styrofoam®, wood, ceramics and glass
- Unsuitable materials: Polyethylene (PE), polytetrafluoroethylene (PTFE) and silicone (Si)
- Precautions: Pressurised container; protect from sunlight and temperatures above 50 °C; do not pierce or burn, even after use; dispose of only when completely empty; do not inhale vapours; do not spray on a naked flame or incandescent material; keep away from children and sources of ignition; avoid smoking and use in a well-ventilated area
- Cleaning: Use cleaning petrol to remove adhesive from soiled parts, equipment and stains
- Storage: Store in a cool, dry place where it will not freeze
- Pieces: 1
Dimensions
- Type
- Petrol Glue
- Form
- Spay
- Epoxy
- No
- 2-Component
- No
- High Temperature
- No
- Colour
- Transparent
- Pieces
- 1 pcs
Capacity
- Quantity
- 200 ml
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.