Mercola Strip & Clean paint and varnish remover strips old paint and varnish from wood, metal, walls, ceilings and cement. Its thick gel formula does not run, making it suitable for vertical and horizontal surfaces without affecting the original surface. It is suitable for most varnishes and paints, including polyurethane and solvent-based varnishes and lacquers, plastic and acrylic paints, and oil-based paints. It contains no dichloromethane and complies with Regulation 276/2010/EU.
Apply with a brush and remove the stripped material with a putty knife, scraper or stiff brush. Leave it to work for 15–25 minutes without allowing it to dry; polyurethane varnishes require approximately 45 minutes. If any residue remains, a second coat can be applied. Then rinse the surface with water and allow it to dry thoroughly before applying new paint or varnish. Suitable for indoor and outdoor use at an application temperature of 10–35 °C. Coverage is 2–3 m²/L. No dilution is required.
- Type: Paint and varnish remover
- Colour: Clear
- Volume: 1 L
- Form: Gel
- Suitable surfaces: Wood, metal, walls, ceilings and cement
- Suitable materials: Polyurethane and solvent-based varnishes and lacquers, plastic and acrylic paints, oil-based paints
- Application: With a brush
- Removal: With a putty knife, scraper or stiff brush
- Working time: 15–25 minutes; approximately 45 minutes for polyurethane varnishes
- Coverage: 2–3 m²/L
- Dilution: Not required
- Cleaning: With water
- Application temperature: 10–35 °C
- Use: Indoor and outdoor
- Composition: Dichloromethane-free
- Regulation: 276/2010/EU
Specifications
- Type
- Paint Remover
- Colour
- Transparent
- Acrilyc
- No
Quantity
- Volume
- 1 lt
- Weight
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.