Transceivers / SFP Modules

Cisco Transceiver MGBLX1 SFP 1Gbps MMF 1τμχ

The Cisco MGBLX1 SFP module connects via fiber optic cable and supports 1000BASE-LX, with a data transfer rate of 1 Gbps. The Duplex LC connection and hot-swappable design allow replacement without...

The Cisco MGBLX1 SFP module connects via fiber optic cable and supports 1000BASE-LX, with a data transfer rate of 1 Gbps. The Duplex LC connection and hot-swappable design allow replacement without interrupting network operation. It is suitable for Cisco Small Business and Cisco Small Business Pro Series switches with fiber-optic or Gigabit Ethernet ports.

    ...
See full description See full description
The product is not available for shipping to the selected country.

Description

Description

The Cisco MGBLX1 SFP module connects via fiber optic cable and supports 1000BASE-LX, with a data transfer rate of 1 Gbps. The Duplex LC connection and hot-swappable design allow replacement without interrupting network operation. It is suitable for Cisco Small Business and Cisco Small Business Pro Series switches with fiber-optic or Gigabit Ethernet ports.

  • Quantity: 1
  • Form factor: SFP
  • Data transfer rate: 1 Gbps
  • Fiber type: MMF
  • Application: 1000BASE-LX
  • Connection: Duplex LC
  • Range: Up to 10 km
  • Tx/Rx wavelength: 1310 nm
  • Average output power: -9.5 dBm to -3 dBm
  • Receiver sensitivity: -20 dBm (typical)
  • Receiver overload: -3 dBm (minimum)
  • Power consumption: 1 W (maximum)
  • Operating temperature: 0 °C to 70 °C
  • Storage temperature: -40 °C to 85 °C
  • Operating humidity: 10% to 85%, non-condensing
  • Storage humidity: 5% to 90%
  • Dimensions: 13.4 × 8.5 × 56.5 mm
  • Weight: 0.018 kg
  • Standards: FCC Part 15 Class B, EN55022 Class B (CISPR 22B), VCCI Class B
  • Safety standards: FDA 21 CFR 1040.10 and 1040.11, EN60950, EN (IEC) 60825-1,2
  • Minimum requirement: Switch with an SFP port
  • Package contents: SFP module, quick installation guide

Manufacturer

See full description

Specifications

Specifications

Form Factor
SFP
Data Transfer Speed
1 Gbps
Transmission Media Type
Multi-Mode Fiber (MMF)
Pieces
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Cisco MGBLX1 SFP module connects via fiber optic cable and supports 1000BASE-LX, with a data transfer rate of 1 Gbps. The Duplex LC connection and hot-swappable design allow replacement without interrupting network operation. It is suitable for Cisco Small Business and Cisco Small Business Pro Series switches with fiber-optic or Gigabit Ethernet ports.

  • Quantity: 1
  • Form factor: SFP
  • Data transfer rate: 1 Gbps
  • Fiber type: MMF
  • Application: 1000BASE-LX
  • Connection: Duplex LC
  • Range: Up to 10 km
  • Tx/Rx wavelength: 1310 nm
  • Average output power: -9.5 dBm to -3 dBm
  • Receiver sensitivity: -20 dBm (typical)
  • Receiver overload: -3 dBm (minimum)
  • Power consumption: 1 W (maximum)
  • Operating temperature: 0 °C to 70 °C
  • Storage temperature: -40 °C to 85 °C
  • Operating humidity: 10% to 85%, non-condensing
  • Storage humidity: 5% to 90%
  • Dimensions: 13.4 × 8.5 × 56.5 mm
  • Weight: 0.018 kg
  • Standards: FCC Part 15 Class B, EN55022 Class B (CISPR 22B), VCCI Class B
  • Safety standards: FDA 21 CFR 1040.10 and 1040.11, EN60950, EN (IEC) 60825-1,2
  • Minimum requirement: Switch with an SFP port
  • Package contents: SFP module, quick installation guide

Manufacturer

Form Factor
SFP
Data Transfer Speed
1 Gbps
Transmission Media Type
Multi-Mode Fiber (MMF)
Pieces
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.