Vitex Acrylan Silicon is a silicone acrylic emulsion paint with mould-resistant properties, suitable for exterior surfaces. Its low water absorption and vapour permeability help moisture trapped in the wall escape, reducing the risk of blistering, cracking, peeling and mould growth. It is designed for areas with high humidity and pollution, extreme weather conditions, and the restoration of listed buildings.
It has a matt finish and is resistant to UV radiation and weathering. It is certified as a cool paint by the Department of Physics of the University of Athens, while the HD shades are specially reinforced for increased durability. It can be applied to new or previously painted plaster, concrete or skim-coated surfaces.
- Type: Silicone acrylic emulsion paint
- Use: Exterior
- Properties: Mould-resistant, with low water absorption and vapour permeability
- Colour: White
- Base: W
- Quantity: 10 lt
- Finish: Matt
- Gloss: Below 5 units at 60° (ISO 2813)
- Density: 1.50 ± 0.02 kg/L (ISO 2811)
- Dilution: 0–10% with water
- Coverage: 13–15 m²/L in one coat, 7–8 m²/L in two coats
- Touch dry: 30–60 minutes
- Recoating: After 4–5 hours
- Application: With a roller, brush or airless spray gun
- Application conditions: Temperature of 5–35°C and relative humidity below 70%, with no risk of rain or frost for the next 48 hours
- Surface preparation: Clean, dry and smooth, free of dust, oils and loose material; fill holes and cracks with Acrylic Putty
- Primer: Acrylan Unco Eco
- Colour tinting: Exclusively with the Vitex Coloring system using the recommended tinting base
- Drying new surfaces: At least 30 days for plaster or cement
- Storage: 5–38°C, in closed containers and in a shaded place
- Usage
- Exterior
- Quantity
- 10 lt
- Features
- Acrilyc, Anti-Mildew
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.