It is mounted vertically on a wall or in a cabinet, to be close to the faucet it supplies.

In just 11 minutes, you will have 10 liters of hot water thanks to the 2 kW power electric resistance. No specialized electrical installation is required as it can be connected to a simple socket.

Stainless steel tank, corrosion-resistant, does not require periodic anode replacement.

With the temperature adjustment switch, you can select the water temperature from 23⁰C to 70⁰C.

It is suitable for individual use (application only in one supply) in the bathroom, it can be installed easily and quickly. It offers ease of use or maintenance and meets your daily needs for hot water.

The instant water heater is a type of water heater that heats water in real-time. It only heats the water that passes through it at that moment. There is no hot water storage tank. This has many advantages, such as energy savings, since only the water that is used is heated, as well as longer lifespan, since there is no water tank and no accumulation of salts on the resistance and other components.

It operates with electricity and is single-phase.

The instant water heater has a cold water inlet pipe, which passes through the resistance, heats up, and exits through the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is that the pressure of the incoming cold water should not be too low.

The water temperature is regulated by a thermostat so that it does not exceed a maximum value. The temperatures that the hot water reaches are pre-set so that one can use the hot water directly, without needing to mix it with cold water.

The maximum temperature that can be reached for hot water production is 70 °C, while the maximum water flow rate reaches up to 2.9 liters per minute. Indicatively, 38-42 °C degrees are standard for shower use.

• It is small in size and does not take up much space.
• There are no energy losses, as only the water being used at that moment is heated. Therefore, we save on the electricity bill. In a traditional water heater, the hot water that is not used goes to waste.
• The hot water used in the instant water heater is used as is, without mixing with cold, as happens in a traditional water heater. Thus, we also save water, in addition to electricity.
• There is no need to wait for the water to heat up. As soon as we turn on the tap, hot water flows in a few seconds. The traditional water heater takes a few minutes, depending on its size.
• The hot water never runs out. As long as we have the tap open, we will have hot water.