Skroutz.mt

Kraft & Dele Electric Eccentric Sander 125mm Electric 1200W with Speed Control and with Suction System KD1678-Y
Sanders

Kraft & Dele Electric Eccentric Sander 125mm Electric 1200W with Speed Control and with Suction System KD1678-Y

The eccentric rotary sander from Kraft&Dele is intended for sanding and finishing plaster or wood. The short handle and additional handle allow for precise sanding, while the motor's movement is...

The eccentric rotary sander from Kraft&Dele is intended for sanding and finishing plaster or wood. The short handle and additional handle allow for precise sanding, while the motor's movement is transmitted through the gearbox without the use of unnecessary drive lines.

It is equipped with a dust collection bag and uses sanding sheets with holes for better...

See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Soft Start

    Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    2.3

    General sanding, finishing of wood or paint.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 2500 gr
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

The eccentric rotary sander from Kraft&Dele is intended for sanding and finishing plaster or wood. The short handle and additional handle allow for precise sanding, while the motor's movement is transmitted through the gearbox without the use of unnecessary drive lines.

It is equipped with a dust collection bag and uses sanding sheets with holes for better dust removal. The motor speed control function with 6 levels allows you to adjust the disc rotation speed according to the material you are working on. The sander features a soft start system, which prevents immediate startup at full speed.

The ergonomic handles are covered with a non-slip rubber coating, increasing comfort and precision during work.

The package includes:

  • The eccentric rotary sander
  • The dust collection bag
  • 1 P80 sanding sheet

Features:

  • Handles covered with non-slip coating
  • No-load speed: 4000-14000 rpm
  • Abrasive disc diameter: 125 mm
  • Power supply: 230V / 50Hz
  • Weight: 2.5 Kg
  • Power: 1200 W

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
1200 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Eccentricity
2.3 mm

Eccentricity: 2.3

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Net Weight
2500 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
14000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

1.0
1
1.0
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • alexisimopoulos11
    1
    0 out of 1 members found this review helpful
    alexisimopoulos11

    Verified purchase

    Weak with intense vibrations....Not even suitable for finishing...Average construction. It already broke after a few months of use...

    Translated from Greek ·
    Did you find this review helpful?
  • alexisimopoulos11
    1
    alexisimopoulos11

    Weak with intense vibrations....Not even suitable for finishing...Average construction. It already broke after a few months of use...

    Translated from Greek ·
    0
  • See all

Description & Specifications

The eccentric rotary sander from Kraft&Dele is intended for sanding and finishing plaster or wood. The short handle and additional handle allow for precise sanding, while the motor's movement is transmitted through the gearbox without the use of unnecessary drive lines.

It is equipped with a dust collection bag and uses sanding sheets with holes for better dust removal. The motor speed control function with 6 levels allows you to adjust the disc rotation speed according to the material you are working on. The sander features a soft start system, which prevents immediate startup at full speed.

The ergonomic handles are covered with a non-slip rubber coating, increasing comfort and precision during work.

The package includes:

  • The eccentric rotary sander
  • The dust collection bag
  • 1 P80 sanding sheet

Features:

  • Handles covered with non-slip coating
  • No-load speed: 4000-14000 rpm
  • Abrasive disc diameter: 125 mm
  • Power supply: 230V / 50Hz
  • Weight: 2.5 Kg
  • Power: 1200 W

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
1200 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Eccentricity
2.3 mm

Eccentricity: 2.3

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Net Weight
2500 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
14000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

1.0
1
1.0
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • alexisimopoulos11
    1
    0 out of 1 members found this review helpful
    alexisimopoulos11

    Verified purchase

    Weak with intense vibrations....Not even suitable for finishing...Average construction. It already broke after a few months of use...

    Translated from Greek ·
    Did you find this review helpful?
  • alexisimopoulos11
    1
    alexisimopoulos11

    Weak with intense vibrations....Not even suitable for finishing...Average construction. It already broke after a few months of use...

    Translated from Greek ·
    0
  • See all