Skroutz.mt

CET MIG 160A Welding Machine Inverter MAG / MIG with Maximum Welding Current 160A and Duty Cycle 85%
Welding Machines

CET MIG 160A Welding Machine Inverter MAG / MIG with Maximum Welding Current 160A and Duty Cycle 85%

Key features:

  • Welding current (max): 160 A
  • Operating voltage: 230V
  • Weight: 25kg
See full description

  • Welding Current

    160

    Suitable for use in medium-thickness metal constructions and pipelines.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    5.4

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
180 00 €

-10% for 2+ products

Delivery by Wed, 24 Jun
53,00 €   shipping cost
Sent from Greece
Add at least 2 of the same or different products from the offer and get -10% on every product!

Offer's products

All products in the offer
From Cet-Welding
Greece
20+ pieces
See Tools on the page of Cet-Welding
Product report

Description

Description

Capabilities

Inverter MIG welding machine, where the inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MIG method requires the wire to have a special coating (flux) or it needs to be connected to an external gas cylinder (e.g., argon, CO2). The MAG method creates welds with gas supply, making it ideal for indoor welding. It can operate continuously for 8.5 minutes at 160A before needing to stop to cool down. Therefore, you may need more time to melt thicker wires and make more passes on thicker welds due to the low maximum amperage it supports. Its weight reaches 16kg.

Features

  • Welding current (minimum): 30 A
  • Welding current (maximum): 160 A 
  • Fuse: 16A
  • Operating voltage: 230V
  • Dimensions (length x width x height): 540 x 330 x 450 mm
  • Weight: 25kg


    Manufacturer

    OEM

    Manufacturer Details

    Warnings & Safety Information
    See full description

    Specifications

    Specifications

    Dimensions

    Type
    MAG, MIG

    Type

    MIG

    The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).
    Welding Current (max)
    160 A

    Welding Current (max): 160


    Suitable for use in medium-thickness metal constructions and pipelines.
    Operation Cycle (max Ampere)
    85 %

    Operation Cycle (max Ampere)

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
    Supply Voltage
    230 V

    Supply Voltage: 230


    It is the supply voltage that the machine requires from the electrical grid.
    Power
    5.4 kVA

    Power: 5.4


    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
    Maximum Wire Diameter
    0.9 mm

    Maximum Wire Diameter: 0.9


    The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
    Weight
    16000 gr

    Additional Features

    Inverter
    Yes

    Inverter


    New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
    IGBT
    No
    VRD
    No
    with Voltage Stabilizer
    No
    for Generator with AVR
    No

    Features

    Hot Start
    No
    Anti Stick
    No
    Arc Force
    No
    2T Operation
    No
    4T Mode
    No
    Spot Function
    No
    Pulsed
    No

    Important information

    Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

    See all specifications

    Reviews (2)

    Reviews

    5.0
    2
    5.0
    Review this product
    1. 2
    2. 4 stars
      0
    3. 3 stars
      0
    4. 2 stars
      0
    5. 1 star
      0
    Review this product
    • kostas_koubis1877
      5
      kostas_koubis1877

      Professional machine! It is worth its money and more! In the test with flux wire I was completely satisfied, I imagine it will be the same with gas! Very good packaging, I would recommend it to everyone!

      Translated from Greek ·
      Did you find this review helpful?
    • 5
      stavranton

      • Power
      • Machine durability
      • Construction quality
      • Weight
      • Easy to use
      • Welding cable length
      • Value for money
      • Volume

    Description & Specifications

    Capabilities

    Inverter MIG welding machine, where the inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MIG method requires the wire to have a special coating (flux) or it needs to be connected to an external gas cylinder (e.g., argon, CO2). The MAG method creates welds with gas supply, making it ideal for indoor welding. It can operate continuously for 8.5 minutes at 160A before needing to stop to cool down. Therefore, you may need more time to melt thicker wires and make more passes on thicker welds due to the low maximum amperage it supports. Its weight reaches 16kg.

    Features

    • Welding current (minimum): 30 A
    • Welding current (maximum): 160 A 
    • Fuse: 16A
    • Operating voltage: 230V
    • Dimensions (length x width x height): 540 x 330 x 450 mm
    • Weight: 25kg


      Manufacturer

      OEM

      Manufacturer Details

      Warnings & Safety Information

      Dimensions

      Type
      MAG, MIG

      Type

      MIG

      The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).
      Welding Current (max)
      160 A

      Welding Current (max): 160


      Suitable for use in medium-thickness metal constructions and pipelines.
      Operation Cycle (max Ampere)
      85 %

      Operation Cycle (max Ampere)

      The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

      2.

      For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
      Supply Voltage
      230 V

      Supply Voltage: 230


      It is the supply voltage that the machine requires from the electrical grid.
      Power
      5.4 kVA

      Power: 5.4


      Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
      Maximum Wire Diameter
      0.9 mm

      Maximum Wire Diameter: 0.9


      The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
      Weight
      16000 gr

      Additional Features

      Inverter
      Yes

      Inverter


      New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
      IGBT
      No
      VRD
      No
      with Voltage Stabilizer
      No
      for Generator with AVR
      No

      Features

      Hot Start
      No
      Anti Stick
      No
      Arc Force
      No
      2T Operation
      No
      4T Mode
      No
      Spot Function
      No
      Pulsed
      No

      Important information

      Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

      Reviews (2)

      5.0
      2
      5.0
      Review this product
      1. 2
      2. 4 stars
        0
      3. 3 stars
        0
      4. 2 stars
        0
      5. 1 star
        0
      Review this product
      • kostas_koubis1877
        5
        kostas_koubis1877

        Professional machine! It is worth its money and more! In the test with flux wire I was completely satisfied, I imagine it will be the same with gas! Very good packaging, I would recommend it to everyone!

        Translated from Greek ·
        Did you find this review helpful?
      • 5
        stavranton

        • Power
        • Machine durability
        • Construction quality
        • Weight
        • Easy to use
        • Welding cable length
        • Value for money
        • Volume
      180,00 €
      53,00 €   shipping cost