Chromodomí’s Step Latex emulsion paint is intended for indoor use and can be applied with a roller, brush or spray gun. It spreads easily and creates a velvety finish with excellent coverage and whiteness. It withstands frequent washing, contains no ammonia and is certified in accordance with the EN 71-3 standard.
Before application, clean the surface to remove dust, grease, oil, peeling old paint, rust, mould and moisture. Apply a primer first to new or porous surfaces. Stir the paint thoroughly and apply 2 coats, allowing 1–2 hours between coats. Do not apply at temperatures below 6 °C or above 40 °C, or at relative humidity above 80%. It reaches full mechanical resistance after 20–30 days. Clean tools immediately with warm water and soap. Do not dispose of wash water where it could enter groundwater.
- Use: Indoor
- Quantity: 3 lt
- Colour: White
- Finish: Velvety
- Coverage: Excellent
- Whiteness: Excellent
- Wash resistance: Suitable for frequent washing
- Ammonia: Does not contain ammonia
- Standard: EN 71-3
- Application tools: Roller, brush or spray gun
- Coats: 2
- Time between coats: 1–2 hours
- Time to reach full mechanical resistance: 20–30 days
- Application temperature: From 6 °C to 40 °C
- Maximum relative humidity for application: 80%
- Tool cleaning: Immediately with warm water and soap
- Product Number
- 01-PS
- Usage
- Interior
- Quantity
- 3 lt
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.