Description
Specifications
Chromodomi Velvet Acryl emulsion paint is acrylic and intended for both indoor and outdoor use. Apply in two coats, with coverage of 8–10 m² per litre per coat.
Before application, the surface must be cleaned of dust, grease, oil, flaking old paint, rust, mould and moisture. On new or porous surfaces, apply the appropriate primer first. Allow 1–2 hours between coats. The paint reaches its mechanical strength after 20–30 days.
- Type: Acrylic emulsion paint
- Use: Indoor and outdoor
- Colour: White
- Quantity: 3 L
- Coverage: 8–10 m² per litre per coat
- First-coat dilution: 15% water
- Second-coat dilution: 5–10% water
- Drying time: 1–2 hours, depending on application conditions
- Coats: 2
- Time between coats: 1–2 hours
- Application temperature: From 6 °C to 40 °C
- Relative humidity during application: Up to 80%
- Application tools: Brush, roller or spray gun
- Tool cleaning: With warm water and soap immediately after use
- Protective equipment: Gloves, protective clothing, and eye and face protection
- In case of eye contact: Rinse with plenty of water for several minutes; remove contact lenses if easy to do, then continue rinsing
- Poison Control Centre: 210 7793777
- Usage
- Exterior, Interior
- Quantity
- 3 lt
- Weight
- -
- Features
- Acrilyc
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.